• The following steps have the same function as

“REFRESH” ( pg. 6).

 

1. Attach the battery to the camcorder with no

cassette inserted.

 

2. Set the Power Switch @ to “ ” or “ ” while

pressing down the Lock Button ! located on

the switch.

 

• During charging or discharging, the camcorder

cannot be operated.

 

• Charging and discharging is not possible if the

wrong type of battery is used.

 

• When charging the battery pack for the first time

or after a long storage period, the CHARGE lamp

) may not light. Remove the battery pack from

the camcorder, then try charging again.

• If a fully-charged battery’s operation time remains

extremely short, the battery is worn out. Please

purchase a new one.

 

• Perform charging where the temperature is

between 10°C and 35°C. 20°C to 25°C is the ideal

temperature range for charging. If the environment

is too cold, charging may be incomplete.

• Charging time varies according to the ambient

temperature and the status of the battery pack.

• Since the AC Adapter processes electricity

internally, it becomes warm during use. Be sure to

use it only in well-ventilated areas.

• The following operation stops charging or

discharging:

 

• Set the Power Switch @ to “

”, “ ” or “ ”.

• Disconnect the AC Adapter from the camcorder.

• Unplug the AC Adapter’s power cord from the

AC outlet.

 

• Detach the battery from the camcorder.

• Using the optional AA-V15EG AC Power Adapter/

Charger, you can charge the BN-V10U/V12U/

V20U/V400U battery pack without the camcorder.

However, it cannot be used as an AC adapter.

• To avoid interference with reception, do not use

the AC Adapter near a radio.

 

Date/Time Settings

1)Set the Power Switch @ to “” while pressing down the Lock Button ! located on the switch.

2)Press the MENU Wheel 1 in. The Menu Screen appears.

•You can select the language (ENGLISH or

RUSSIAN) used in all messages displayed on screen ( pg. 18, 22 “MENU LANG.” in

SYSTEM MENU).

3)Rotate the MENU Wheel 1 to select

“4TO SYSTEM MENU” and press it to display SYSTEM MENU. Rotate the MENU Wheel 1 to select “4NEXT” and press it to display the next page.

4)Rotate the MENU Wheel 1 to select “DATE/ TIME” and press it. The DATE/TIME Menu appears.

5)To set “YEAR”, “MONTH”, “DAY” or “TIME” (hour/minute), rotate the MENU Wheel 1 to select the desired item, and press it. When the setting begins blinking, rotate the MENU Wheel 1 until the correct setting appears and then press it. The setting stops blinking.

6)When none of these settings (“YEAR”,

“MONTH”, “DAY”, “TIME”) blinks, rotate the MENU Wheel 1 to select “4EXIT”, and press it. The Menu Screen reappears with the highlight bar on “4RETURN”.

7)Press the MENU Wheel 1 in to close the Menu Screen.

•To display the date and time in the camcorder’s

display and on a connected TV, see DATE/TIME DISP. ( pg. 21) in SYSTEM MENU.

•The date/time cannot be stored in memory if the built-in clock battery runs out. Consult an authorised JVC dealer for replacement, or set the date/time as necessary before you start shooting.

• Recording time is reduced significantly when

Zoom or Record-Standby mode is engaged

repeatedly or the LCD monitor* is used

repeatedly.

• Before extended use, it is recommended that you

prepare enough battery packs to cover 3 times the

planned shooting time.

* Applicable models only.

 

D A T E

T I M E

 

 

 

 

 

 

Y E A R

H

2

0 0 3

M O N T

 

 

6

D A Y

 

 

2 8

T I M E

2 0

: 2 0

1

@

!

24-hour indication

tE X I T

7