JVC GS-TD1 Trouble, Page, Power, closed, Action, pack.), time.), Trouble, “AVCHD”, Playback, display), charging, playback, Recording, performed, interrupted, POWER/CHARGE

Trouble

	Trouble
Power	POWER/CHARGE
	lamp starts blinking
	when the monitor is
	closed.
	Recording cannot be
Recording	performed.
	Recording stops
	automatically.
	Sound or video is
	interrupted.
Playback	Desired files cannot be
	found on the index
	screen (thumbnail
	display).
	3D images cannot be
	seen on a 3D
	compatible TV properly.
problemsOther	The lamp does not flash
	during battery pack
	charging.
	This unit heats up.

	Action	Page
0	The battery pack is being charged.	10
0	Check the A / B button.	7
0	Set to the recording mode by tapping the	17
	qbutton on the screen.
0	Turn off this unit, wait for a while, and turn	-
	it on again. (This unit stops automatically
	to protect the circuit when the
0	temperature rises.)	-
	Recording stops automatically after 12
	hours of continuous recording.
0	Sometimes playback is interrupted at the	-
	connecting section between two scenes.
	This is not a malfunction.
0	Press the 3D button to switch to the	7
0	desired mode for playback.	15
	Set “3D VIDEO REC FORMAT” in the
	video recording menu to “MP4(MVC)” or
	“AVCHD”.	-
0	Tap I/Jto select the desired media for
	playback.
0	Set “HDMI OUTPUT” in the “COMMON”	-
	menu accordingly.
0	Check the remaining battery power.	7
	(When the battery pack is fully charged,
0	the lamp does not flash.)	10
	When charging in either a hot or cold
	environment, ensure that battery is being
	charged within the permitted
	temperature range. (Otherwise,
	charging may stop to protect the battery
	pack.)
0	This is not a malfunction. (This unit may	-
	become warm when used for a long
	time.)

32 For more information, refer to the Detailed User Guide http://manual.jvc.co.jp/index.html/