LOADING THE PAPER TRAY | EN 9 |
Removing and Attaching the Paper
Tray
• Push the tray slightly to unlock the latch, then pull it out.
• To attach, insert until you hear the paper tray catch in place.
Loading paper in the paper tray
Perforations
Lever | Partition panel A |
| |
| Perforations |
Printing side | Partition |
| |
Partition | panel B |
panel A | C |
|
1.Adjust partition panel A according to the paper size.
2.Press down the lever and insert the paper.
•Load the paper shiny side up, with the side that has the wider area beyond the perforations closest to partition panel B . Load no more than 25 sheets.
3.Adjust partition panel B according to the paper size.
After inserting the paper, push in C until it clicks into place.
NOTES:
•Fan the paper to separate the individual sheets.
•Be sure to thoroughly read the precautions listed on the paper tray.
•Place the printing paper shiny side up (the side with no printing on it) in the paper tray. A paper jam could result if the paper is inserted with the wrong side facing up.
•If a paper jam occurs, refer to page 12, "Clearing a Paper Jam."
•Remove the paper from the paper outlet. If more than 25 sheets accumulate in the paper outlet, a paper jam could result.