SETTINGS ON THE PRINT DIALOG BOX

EN 27

Although it is normally possible to obtain print results of sufficient quality just by setting the print type and paper size, this section describes how to use the menus to increase print quality even further.

1

2

Option Screen

1.Number of print copies

Set when consecutively printing the same screen. A setting from 1 to 25 can be made.

2.Print pages

Specifies the page to be printed. Selecting All will print all pages of the image. Pages can be selected when specifying the pages to be printed.

3.Brightness adjustment

Make this adjustment when the color appears darker or lighter in the printout than it does displayed on the screen.

•Adjust the brightness of the entire image using the bar. With "0" as the default, this value can be adjusted between –100 to +100. Negative values result in a darker image while positive ones result in a brighter image. This setting is effective when dealing with images that are too dark or too bright overall.

4.Contrast adjustment

Make this adjustment when differences in brightness for the entire image are not clearly defined or when the image appears fuzzier in the printout than it does displayed on the screen.

3

4

5

•Adjust the contrast of the entire image using the bar. With "0" as the default, this value can be adjusted between –100 to +100. Increasing the contrast makes the bright areas appear brighter and the dark areas appear darker, while decreasing the contrast decreases the apparent difference in brightness between bright and dark areas.

5.Image quality adjustment (hue)

Select when you want to change the hue by adjusting the shade of Red, Green and/ or Blue.

•The intensities of each of these colors can be adjusted using a bar.

With "0" as the default, these values can be adjusted between –100 to +100.

NOTE:

When you adjust the print quality using the Manual Correction settings the computer needs extra processing time. Therefore, when you print after adjusting the print quality you may experience a period of up to 90 seconds, when your computer becomes unresponsive. This is normal. After this time the status window appears and opetaion is restored.