|
| EN 29 | |
Message | v Appears when: | Page |
|
m Action: |
| ||
|
|
| |
Printer is not | v This message appears if the printer power is not on, or if |
|
|
connected or Power | the power supply is not connected properly. | 13, 22 |
|
OFF. Printing aborted. | m After connecting the power supply properly, turn on the |
| |
|
| ||
| printer. |
|
|
Printing data was not | v This message appears if an attempt was made to print |
|
|
transmitted. Printing | without first sending the printing data to the printer. | 17, 25 |
|
aborted. | m Load the image into the personal computer first, and then |
| |
|
|
| |
| initiate the printing operation. |
|
|
Data transmission | v This message is displayed when communication has |
|
|
error has occurred. | become impossible due to a faulty USB cable connection |
|
|
Printing aborted. | or for some other reason while sending an image to the | 13, 22 |
|
| printer. |
| |
|
|
| |
| m Check the USB cable connection and try printing again. |
|
|
Do you want to abort | m To stop printing while printing is in progress, click Stop. | — |
|
printing? |
|
| |
|
|
|
|
Memory is not enough. | v This message is displayed when the memory capacity of |
|
|
Printing aborted. | the PC is insufficient. | — |
|
| m Add more memory or close any other applications that |
| |
|
|
| |
| may be running currently. |
|
|
Data deleted from | v This message is displayed because print data has been |
|
|
spooler. Printing stops. | deleted from the spooler. | 13, 22 |
|
| m Repeat the print procedure to |
|
|
m Click Properties – Details, and then Spool Settings... to |
|
| |
communications are | display the Spool Settings window. Select Enable bi- |
|
|
not supported. Please | directional support for this printer. |
|
|
enable |
| 20 |
|
communications on |
|
|
|
the Printer Properties |
|
|
|
window. |
|
|
|
The spool settings are | v The Spool Settings... under Properties – Details have not |
|
|
incorrect. The settings | been made correctly. |
|
|
are automatically | m Take the action indicated in the | 20 |
|
changed. Press the OK |
| ||
|
|
| |
button and try printing |
|
|
|
again. |
|
|
|
Invalid data. Select an | v This message is displayed when an attempt is made to |
|
|
appropriate printer | utilize the USB driver for this device with a printer driver |
|
|
driver. | other than that for this device. | 20 |
|
| m Check the model of the printer being used and check the |
| |
|
|
| |
| printer specified in the field Print to the following port: on |
|
|
| the printer’s Properties window. |
|
|
Software requirements | v The printer driver has not been installed properly. |
|
|
are damaged. Install | m | 14, 23 |
|
the printer driver |
| ||
|
|
| |
again. |
|
|
|
|
|
|
|