![](/images/new-backgrounds/1022449/2244919x1.webp)
AM antenna | Connecting Speakers |
|
|
]
]
ANTENNA
1 | 3 |
|
2 |
1
AM EXT
AM LOOP
FM 75
COAXIAL
|
| Red | |
| RIGHT | LEFT | |
| MAIN |
| |
| SPEAKERS |
| |
Speaker | SPEAKER | Speaker | |
cord | cord | ||
IMPEDANCE | |||
MIN 4 | |||
|
| Black |
2
AM loop antenna (supplied)
1Connect the AM loop antenna to the AM LOOP terminals as illustrated.
2Turn the AM loop antenna until you have the best reception.
To connect an outdoor AM antenna
When reception is poor, connect a single
For better reception of both FM and AM
•Make sure the antenna conductors do not touch any other terminals and connecting cords.
•Keep the antennas away from metallic parts of the unit, connecting cords, and the AC power cord.
Right speaker | Left speaker |
1Press and hold the clamp of the speaker terminal on the rear of the unit.
2Insert the end of the speaker cord into the terminal.
Match the polarity of the speaker terminals: Red ª to red ª and black · to black ·.
• If the cords are covered with insulation, remove a short section of insulation at the end of each cord by twisting and pulling it off.
3Release the finger from the clamp.
•DO NOT connect speakers while the power is
on.
• DO NOT connect more than one speaker to each speaker teminal.
IMPORTANT: Use only speakers with the same speaker impedance as indicated by the speaker terminals on the rear of the unit.
7