Using the Timers

There are three timers available—Daily Timer, Recording Timer, and Sleep Timer.

Before using the timers, you need to set the clock built in the unit (see page 9). When you press TIMER on the unit for more than 3 seconds, the display alternates between “ADJUST” and “CLOCK” for about 5 seconds.

Using Daily Timer and Recording Timer

You can set the timer whether the unit is on or off.

When the on-time comes, the unit automatically turns on (the indicator flashes just before the on-time, and continues flashing while the timer is operating). Then, when the off- time comes, the unit automatically turns off (on standby). The timer setting remains in memory until you change it.

3	Set the off-time you want	4

the unit to turn off (on standby) at.

1)Press ¢ or 4 to set the hour, then press TIMER.

2)Press ¢ or 4 to set the minute, then press TIMER.

The unit enters source selecting mode.

4 Press ¢ or 4 to select 4 the timer mode (Daily

Timer or Recording Timer) and the source to play, then press TIMER.

•Each time you press ¢ or 4, the timer mode and the source change as follows:

7¢

TIMER

7¢

TIMER

•When the DAILY indicator is lit on the display, the timer acts as the Daily Timer. Once the Daily Timer has been set, it will be activated at the same time everyday until the timer is turned off.

•When the REC indicator is lit on the display, the timer acts as the Recording Timer. After the Recording Timer has been performed, the details of the setting remain stored but the timer is turned off.