~ TV/monitor

! AM/FM antenna

 

To assemble the AM loop antenna

Composite video

 

cord (supplied)

 

S-Video cord

 

(not supplied)

 

•Connect the VIDEO jack or S-VIDEO jack; whichever you want to use.

–You can get better picture quality by connecting with S video cord.

ŸDigital audio component

OPTICAL

DIGITAL

OUTPUT

Optical digital cord (not supplied)

Protective cap

To connect AM/FM antenna

•If the antenna cord is covered with vinyl on the tip, twist and pull the vinyl off to remove.

AM loop antenna (supplied)

Turn until the best reception is obtained.

•Set “DIGITAL AUDIO OUTPUT” in the “AUDIO” menu correctly according to the connected digital audio equipment (see page 38).

•The digital signal through the OPTICAL DIGITAL OUTPUT terminal is transmitted only when “DVD/CD” is selected as the source.

FM antenna (supplied)

Extend it so that you can obtain the best reception.

For better FM reception

FM outdoor antenna (not supplied)

•Disconnect the supplied FM antenna, and connect an outdoor FM antenna using a 75 Ω wire with coaxial type connector.

•Make sure the antenna conductors do not touch any other terminals, connecting cords or the power cord. Also, keep the antennas away from metallic parts of the System, connecting cords, and the AC power cord. This could cause poor reception.

4