ENGLISH | Listening to a Disc/USB Device | ||
To insert a disc | To select a title/group | ||
| |||
|
| While playing... | |
|
| (While holding) | |
| • When using an 8 cm disc, place it on the inner circle | To select a chapter/track/file | |
| While playing... | ||
| of the disc tray. |
•Program Play/Random Play cannot be used for “USB1,”
(for USB2 only)
Canceled (for USB2 only)
To exit Program Play or Random Play, press PLAY MODE repeatedly until PRGM, RND, and GR indicator are all off before or after playback.
(While holding)
Repeat the procedure to select the start point (A), then the end point (B) during playback.
• To cancelUnique Video Disc/File Operations
The operations will vary depending on the discs or files.Timer Operations
Setting the ClockWithout setting the
•If you have already adjusted the clock before, press the button repeatedly until the clock setting mode is selected (see below).
2Adjust the hour, then the minute using the cursor buttons, press ENTER/SET.•To exit the clock settings, press CLOCK/TIMER (while holding SHIFT) as required.
•To return to the previous step, press CANCEL (while holding SHIFT).Daily Timer |
|
| Daily Timer |
|
| Daily Timer |
DAILY1 = ON (Time) |
|
| DAILY2 = ON (Time) |
|
| DAILY3 = ON (Time) |
Listening to the Radio
To select the AM tuner interval spacing1Select “TUNER AM.”2On the main unit, while pressing KARAOKE SCORING, touch 4 or ¢ to select the AM tuner interval spacing (9 kHz or 10 kHz).
Tuning in to a StationWhile FM or AM is selected...2 sec.Listening to a Tape (for NX-DC3)
To insert or remove a tapeYou can play back a type I tape.• The use of Open | Insert* | Remove | Close |
|
|
Guide
When the System is turned on and the disc tray is closed, press 0 while touching 7 (on the main unit). To cancel the prohibition, repeat the same procedure. “UNLOCKED” appears on the display.
•When you press 4 for the first time, you go back to the beginning of the current chapter/track/ file.
To locate a particular portion• You can arrange the playing order of the chapters/tracks/ |
files (up to 99) before you start playback. |
|
| Canceled |
| Clock setting |
|
| Recording Timer (for |
(While holding) |
|
|
|
| REC TIMER = ON (Time) |
Frequency starts changing on the display. When a station (frequency) with sufficient signal strength is tuned in, the
To start | To stop |
NX-D7/NX-D5/NX-D3/NX-DC3
USB cable (not supplied)
The illustration above is for
To start
To pause | To stop |
The System can store the stop point, and when you start playback again by pressing 3, DVD/CD 6 or USB 1 6 (even while on standby), it starts from the position where you have
If different types of playable files (audio/still picture/ moving picture) are recorded, select a file type to play.
While playback is stopped...While playing...
For USB2Press 4 / ¢ while playing. The search speed changes only in two steps.To return to normal playback, press 3.To locate an item directly• To select a title/groupNumber buttons
(While holding)
• To select a chapter/track/filePress a chapter/track/file number using the number buttons.To search for a track/group by name (for USB2)1
(While holding)
TR SEARCH ? Search for a track by title.GR SEARCH ? Search for a group by title.2Enter the title using the number buttons.•To enter the title, see “Editing Operations.”•You can enter up to 5 characters of the title.3Press ENTER/SET to start the Title Search.When a track or group is found, playback starts.• Resume does not work for Program Play. |
2 Select chapters/tracks/files you want for Program Play using the number buttons.
•For DVD Video and MP3/WMA/WAV files: Select a title or group number, then select a chapter or track/file number.
3Repeat step 2 until you complete your program.4 Start playback.For USB2:1Select chapters/tracks/files you want for Program Play using the number buttons and press ENTER/SET.
2Repeat step 1 until you complete your program.3 Press PLAY MODE repeatedly to select PROGRAM.4 Start playback.
GROUP RNDM (Group Random) (for USB2
Playing Repeatedly
Press REPEAT repeatedly to select Repeat Mode.• Repeat Mode varies depending on the medias or the files.REPEAT CHAP | Repeats the current chapter. |
REPEAT TITL | Repeats the current title. |
REPEAT TRK | Repeats the current track/file. |
REPEAT GRP | Repeats the current group. |
REPEAT PG | Repeats the current original program. |
REPEAT PL | Repeats the current Play List. |
REPEAT ALL | Repeats all the contents or programmed |
| tracks/files. |
REPEAT OFF | Canceled. |
(While holding)
You can view the same scene from different angles.To play back still picturePress 8 while playing.To play back frame by framePress 8 while displaying the still picture.To play backPress 8 to display the still picture, then press 1* or ¡ to select
While playing...
The playback position moves back about 10 seconds before the current position (only within the same title for DVD Video).
ZoomPress ZOOM repeatedly to select the magnification of the zoom. You can move the
3 Select the playback
5 Select the volume level (“MIN” to “MAX” and “–
* You can select up to 99 groups and 150 chapters/tracks/files.
To cancel the Daily Timer, select DAILY (1 – 3) you want to cancel, then press CANCEL (while holding SHIFT).
To turn on the Daily Timer, select DAILY (1 – 3) you want to turn on, then press ENTER/SET.
•Change the source to “USB2” and check that the USB device is properly detected by the System.
•Make recording settings.1Select REC TIMER time setting mode (ON)2 Set the timer as you like.
Repeat the procedure for the following settings until finished.
1Set the hour then the minute for
2 Set the hour then the minute for
4 For “TUNER AM” or “TUNER FM”: Select a preset channel.
5 Select the volume level (“MIN” to “MAX” and “–
Once settings are completed, the timer setting information appears in sequence.
3Turn off the System (on standby), if you have set
the timer with the System turned on.
• Recorded files are stored into the group named “TIMER.”To cancel the Recording Timer, select REC TIMER, then press CANCEL (while holding SHIFT).
To turn on the Recording Timer, select REC TIMER, then press ENTER/SET.•When you repeatedly press the button, the frequency changes step by step. To manually stop the search, press either button.
•The ST indicator lights while an FM stereo station with sufficient signal strength is tuned in.
If the FM reception is poorThe MONO (monaural) indicator lights on the display. Reception will improve though stereo effect is lost— Monaural reception.
To restore the stereo effect, press the button again. The MONO (monaural) indicator disappears.
Presetting the StationsYou can preset 30 FM and 15 AM stations.1Tune in to a station you want to preset.•You can also store the monaural reception mode for FM preset stations if it has been selected.
2Press ENTER/SET to activate the preset number entry mode.•Finish the following process while the indication on the display is flashing.3Select a preset number for the station you store using the number buttons.4Press ENTER/SET to store the station.To tune in to a preset station1Select the band (FM or AM).2Select the preset number using the number buttons.Listening to External
Equipment
To connect a digital audio playerYou can listen to the digital audio player connected to the AUDIO IN jack.Stereo mini plug (not supplied)
From audio output (or headphone out, etc.)
The illustration above is for
•Make sure to turn down the volume on the System to minimum level before starting playback.
To adjust the audio input levelIf the sound from the device connected to the AUDIO IN jack is too loud or too quiet, you can preset the audio input level through the AUDIO IN jack (without changing the volume level).
While “AUDIO IN” is selected as the source...•As the number of the level increases, the preset input level is increased.17
18 | 21 |
22
On-screen Operations
Operating the disappears
2Select (highlight) the function using the cursor buttons then press ENTER/SET.Function iconsTIME Time indications: Press repeatedly ENTER/SET to change the timer indication.
TIME: Elapsed playing time of the current chapter/track (not applicable for
REM: Remaining time of the current chapter/ track (not applicable for
T. REM: Remaining time of title (DVD Video)/ original program
OFF Repeat Mode: Select the desired option in the
1 | Listed number | 5 | Title |
2 | Recording/creating date | 6 | Highlight bar |
3 | Recording channels | 7 | Chapters included |
4 | Recording time | 8 | Playback time |
For
Setup Menu
You can change the settings of the System.•The Setup Menu can be used only when “DVD/CD” or “USB1” is selected as the source.
1When playback is stopped, press SET UP whileholding SHIFT to display the Set up Menu.2Select the menu and item using the cursor buttons.3Press ENTER/SET.4Select the options using the cursor buttons, thenpress ENTER/SET.To clear the Setup Menu, press SET UP (while holding SHIFT).Menus and items
LANGUAGE•MENU•ON SCREEN
• MONITOR
“4:3 PS,” “16:9 MULTI NORMAL,” “16:9 MULTI AUTO,” “4:3 MULTI LB,” or
“4:3 MULTI PS”).•PICTURE
•SCREEN
•FILE
•HDMI DVI
•HDMI
•DIGITAL AUDIO
•DOWN
•D.RANGE
•HDMI AUDIO
•
Sound & Picture Adjustments
Adjusting the Sound
Various BassOn the main unit | On the remote | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
LITEnEASY | Suitable for Karaoke and classical music. You | |||
|
| can obtain a comfortable bass sound. | ||
MOVIE | Suitable for a video source and playback of | |||
|
| external component. You can obtain a strong | ||
|
| bass sound. |
| |
TECHNO | Suitable for disco or techno music. You can | |||
|
| obtain a strong bouncy bass sound. | ||
TURBO | Suitable for most kinds of music and playback | |||
|
| of external component. You can obtain a | ||
|
| balanced bass sound. | ||
|
| |||
AUTO | The System automatically applies TURBO, | |||
|
| LITEnEASY, MOVIE or TECHNO according | ||
|
| to the playback source (initial setting). | ||
OFF | No sound effect. |
|
On the main unit
Headphone
SURR ON | HP Surround is activated. |
SURR OFF | Canceled. |
•If you plug in the headphones while 3D Phonic is in use, Headphone Surround is turned on automatically.
•When 3D Phonic is not in use and Headphone Surround is turned on, unplugging the headphones turns 3D Phonic to “ACTION.”
|
|
| Clear Voice (for DVD/CD and |
|
|
| |
|
|
| dialogues clear for a center channel signal on |
|
|
| |
|
|
| with 3D Phonic activated |
| Selecting the Sound Modes | ||
| |||
|
|
| Sound Mode (for DVD/CD and |
|
|
| select one of the preset Sound Modes |
|
|
| |
ROCK | Boosts low and high frequency. Good for | ||
|
|
| acoustic music (initial setting). |
|
|
| |
POP | Good for music with an emphasis on vocal. | ||
|
|
| |
CLASSIC | Good for classical music. | ||
DANCE | Increases resonance and bass. | ||
HALL | Adds depth and brilliance to the sound. | ||
STADIUM | Adds clarity and spreads the sound, as in an | ||
|
|
| outdoor stadium. |
|
|
| |
USER1/2/3 | Your individual mode stored in memory. See |
My Sound creates an appropriate equalization pattern for your listening condition.
• This does not function for DivX files.To set up My Sound1Select “DVD/CD” or “USB1” as the source.2Enter My Sound setup to measure your hearing.2 sec.
On the TV
“MY SOUND” and “MEASURE“ appear alternately on the display.3Start the measurement.A test tone comes out of the speakers.On the TV
4Each time you hear the tone, press ENTER/SET to memorize the measurements.You hear 5 test tones from the speakers.After finishing the measurement, an appropriate equalization pattern is created and it is shown in white on the TV screen.
DVD
Changing the Picture Tone
To select a picture toneWhile playing, press VFP, then select the preset picture tone using the cursor buttons.
NORMAL | Normally select this. |
CINEMA | Suitable for a movie source. |
USER1/2 | You can adjust parameters and can store |
| the settings. (See below.) |
GAMMA | Adjust if the neutral color is bright or |
| dark |
BRIGHTNESS | Adjust if the entire picture is bright or |
| dark |
CONTRAST | Adjust if the brightness ratio is |
| unnatural |
SATURATION | Adjust if the picture is whitish or |
| blackish |
TINT | Adjust if the human skin color is |
| unnatural |
SHARPNESS | Adjust if the picture is indistinct |
Time search (hours/minutes/seconds): Enter the time in the
CHAP. Chapter search: Enter the chapter number in the
•To correct a
1/3 Audio language or channel, Subtitle language, | ||
1/3 View angle: Select the desired option in the pop- | ||
1/3 | up window using the cursor buttons then press | |
ENTER/SET. | ||
| ||
To clear the |
1 Current source | 8 Repeat Play setting |
2 Current group number/ | 9 Elapsed playing time of the |
total group number | current file (not applicable |
3 Current group | for JPEG files) |
4 Group list | p Operation status icon |
5 File information (only for | q Current file number/ |
MP3/WMA/WAV files) | total number of files in |
6 Current file | the current group (total |
7 Random Play/Program | number of files) |
Play setting (for “DVD/ | w Highlight bar (current |
CD”) | selection) |
| e File list |
DIGITAL AUDIO OUTPUT |
| Output Signals | ||
Playback disc/file | STREAM/PCM | DOLBY |
| PCM ONLY |
DIGITAL/PCM |
| |||
|
|
|
| |
|
|
|
|
|
DVD Video with 48 kHz, 16/20/24 bit Linear PCM | 48 kHz, 16 bit Linear PCM*2 |
| ||
DVD Video with 96 kHz, Linear PCM | 48 kHz, 16 bit Linear PCM |
| ||
DVD Video with Dolby Digital | Dolby Digital bitstream |
| 48 kHz, 16 bit Linear PCM | |
DVD Video with DTS | DTS bitstream | 48 kHz, 16 bit Linear PCM | ||
48 kHz, 16 bit Linear PCM*2 |
| |||
16/20/24 bit Linear PCM |
| |||
|
|
|
| |
Dolby Digital bitstream |
| 48 kHz, 16 bit Linear PCM | ||
SVCD/VCD/CD | 44.1 kHz, 16 bit Linear PCM/48 kHz, 16 bit Linear PCM | |||
CD with DTS | DTS bitstream | 44.1 kHz, 16 bit Linear PCM | ||
32/44.1/48 kHz, 16 bit Linear PCM |
| |||
DivX with MP2, MP3 | 32/44.1/48 kHz, 16 bit Linear PCM |
| ||
DivX with Dolby Digital | Dolby Digital bitstream |
| 32/44.1/48 kHz, 16 bit Linear PCM |
*2 While playing some DVDs, digital signals may be emitted at 20 bits or 24 bits (at their original bit rate) through the OPTICAL DIGITAL OUTPUT terminal if the discs are not
On the remote
•This does not function for
| below. |
FLAT | Canceled. |
5 Press 2 or 3 to select one of the user modes
On the TV
•The last equalization pattern stored into the selected preset number is shown in green.
•To return to the measurement, select “EXIT” on the TV screen, then press ENTER/SET.
5Select a preset number from 1 to 3 to store the equalization pattern using the cursor buttons.
6Press ENTER/SET to store the equalization pattern.•To store other equalization patterns, press the button again and repeat steps 3 to 6.
To select the preset My Sound, press MY SOUND repeatedly.to +8). |
19 | 20 | 23 | 24 |