Enjoying Karaoke
DO NOT keep the microphones connected while they are not in use.IMPORTANT
•Always set MIC LEVEL to “MIN” (0) before disconnecting the microphone.•MIC LEVEL adjustment is valid for both microphones connected to the MIC 1 and MIC 2 jacks.
•For
Singing Along (Karaoke)
•For
•If a microphone is already connected and Mic Mixing is not activated, press MIC MIX to reactivate Mic Mixing.
To cancel the Mic Mixing, press MIC MIX.2Start playing a source.3Sing into the microphone.4Adjust the microphone level and volume.On the main unit | On the remote | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Adjusting the Sound Track for Karaoke
While Mic Mixing is activated...VOCAL MASK Reduces the vocal from stereo (2- channel) source.L CHANNEL Reproduces only the left audio channel.R CHANNEL Reproduces only the right audio channel.To return to normal playback, select “OFF.”To restore the vocal temporarily
While Vocal Masking, L CHANNEL or R CHANNEL isactivated...The vocal or stereo effect will be restored temporarily.To return to Vocal Masking, L CHANNEL or R CHANNEL, press the same button again.
Scoring Your Karaoke Skill (for DVD/CD and USB1)
•It is recommended to select the sound track as follows: For Karaoke DVD Video: Select a sound track with vocal. For Karaoke SVCD/CD: Select “ST,” “ST1” or “ST2.”
•After selecting a sound track, select VOCAL MASK, L CHANNEL or R CHANNEL using the VOCAL MASKING button.
1Select “DVD/CD” or “USB1” as the source.
2 Connect the microphone(s).3 Press KARAOKE SCORING to activate Karaoke Scoring.•To cancel Karaoke Scoring before playback, press the same button again. “KSCORE OFF” appears on the display.
4Start playback and sing into the microphone.Scoring starts.•The K.SCORING indicator flashes during scoring.•When you press 4 or ¢, Karaoke Scoring is canceled and the selected track/file restarts.
Result of the scoring
After the song ends, playback stops and the score board appears on the TV screen with fanfare.
Your score
The latest top 3
The calorie you consumed in your singing
•When you press 8, scoring is canceled. When playback starts again, scoring starts from that point.
•If you do not sing for about 2 minutes after Karaoke Scoring starts, Karaoke Scoring is canceled.
•To obtain a correct scoring result, it is recommended to sing the song completely. If the singing time is less than 3 minutes, the scoring result may be “0” or incorrect.
Changing the Karaoke Setting
1Select the item you want to change.* *
*
*Appears only when “DVD/CD” or “USB1” is selected as the source with Mic Mixing activated.
2Change the parameter or the setting using the cursor buttons.•Key adjustment will be canceled when you deactivate Mic Mixing, or select another track or file, or change the disc.
•You can adjust the key level from +6 toSCORE
PRO | Calculation level is strict. |
AMATEUR | Calculation level is lenient. |
•The mic volume level can be adjusted in 16 steps from MIN
(0) to MAX (15).Reserving Karaoke Songs—Karaoke Program Play (for DVD/CD)
You can determine the playback order. You can program up to 12 steps.1Select “DVD/CD” as the source.2Start and stop playback of the disc.3 Connect the microphone(s).4 Activate Karaoke Program Play.• The PRGM indicator flashes during this mode.5Select songs you want for Karaoke Program Play.Press the number buttons to select songs in the following order.1 Select a title/group.2 Select a chapter/track/file.•To cancel the procedure, press RESERVE. The PRGM indicator disappears.6Start playback.Karaoke Reserve screen disappears and playback starts in the order you have programmed.
•For the Karaoke Program Play with Karaoke Scoring: Each time the song ends, playback stops and the score board appears. Press 3 to start playback of the next track.
7Sing into the microphone.8Adjust the microphone level and volume.To check the programmed contents
Press RESERVE to display Karaoke Reserve screen.•You cannot display Karaoke Reserve screen while Karaoke Scoring is in use.To modify the program
Press RESERVE to display Karaoke Reserve screen.
To erase the unwanted step:1Select the step you want to erase using the cursor buttons.2Press CANCEL while holding SHIFT.•To erase the entire program, repeat the procedure.To add steps in the program:Repeat step 5.Editing Operations
Editing Titles to Tracks or Groups
• You cannot edit the group “GROUP1” (root).1Start and stop playback of the USB device.2 Select a group/track you want to edit.3
ForCanceled
ForG 1 TITLE or GR
–For
You can make up to 999 groups
2To select a destination group, press GROUP/TITLE SKIP while holding SHIFT, then press ENTER/SET.
3Press 4/¢ to select the new track number in the destination group for the target track.
4Press ENTER/SET to start moving.TR ERASE? or TR
FORMAT?
How to Enter Titles
1Select the character type.2Enter a character using the number buttons, then press ENTER/SET to confirm the entry.
Available characters
Button | Uppercase | Lowercase | Numerical | |
character | character | character | ||
|
| (Space) , ! , # , $ , % , & , ’ , ( , ) , |
| |
|
| +, | 1 | |
|
| • Some symbols may not | ||
|
|
| ||
|
| appear on the display. |
| |
|
| ABC | abc | 2 |
|
|
|
|
|
|
| DEF | def | 3 |
|
|
|
|
|
|
| GHI | ghi | 4 |
|
| |||
|
| |||
|
|
|
|
|
|
| JKL | jkl | 5 |
|
|
|
|
|
|
| MNO | mno | 6 |
|
|
|
|
|
|
| PQRS | pqrs | 7 |
|
|
|
|
|
|
| TUV | tuv | 8 |
|
|
|
|
|
|
| WXYZ | wxyz | 9 |
|
|
|
|
|
|
| — | — | 0 |
|
|
|
|
|
To erase a character
When the character entry position is on the character you want to erase, press CANCEL while holding SHIFT.
To enter a space
Select the space by pressing MARK. (See “Available characters” above.)•You can also enter a space at the end of a title using the cursor buttons.Display Message for Recording or Editing Operations
NO DEVICE, NO USB
•No USB device is connected or the connected USB device is not compatible with this System.
PROHIBIT (for NX-D5/NX-D3/NX-DC3)
•The USB device is prohibited from editing file/group.•The same title has been recorded.TRACK FULL
•The USB device exceeds the maximum number of files it can store.SCMS ERROR
•You have tried to copy from a duplicated disc to the USB device.DEVICE ERR
• The unit has failed to read the USB device.CAN’T REC
• The music cannot be recorded.DATA FULL
•The capacity of memory for USB device is full.•The USB device isTR PRTECTED (for NX-D7)
• The track is PROTECTED (for NX-D5/NX-D3/NX-DC3)
• The USB device is NO AUDIO (for NX-D7 only)
•No music file is recorded in the USB device connected to the USB2 terminal.CAN’T PLAY
• Playable format file does not exist in USB device.Using the Bluetooth® Device (for NX-D7)
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Victor Company of Japan, Limited (JVC) is under license. Other trademarks and trade names are those of their respective owners.
•The System supports only Bluetooth audio player using AVRCP or A2DP profile.•When you are using the mobile phone as the Bluetooth audio player, you cannot listen to the talking voice from the speaker of the System.
What you can do with Bluetooth
To listen to a Bluetooth audio player
You can listen to the music played back on a Bluetooth audio player (i.e. mobile phone, audio player, personal computer, etc.) from the speakers of the System.
To listen to music through Bluetooth headphonesYou can listen to the music played back on the System using Bluetooth headphones.
•Some Bluetooth audio players and headphones may not communicate with the System.
Preparation
Connect the Bluetooth adapter (separately purchased) to the Bluetooth ADPT terminal on the front panel of the main unit.
•Do not use a USB extension cable to connect a Bluetooth adapter.Bluetooth adapter (not supplied)
25 | 26 |
29
30 |
Recording Operations
Before you Start Recording
• | It may be unlawful to record or play back copyrighted |
| material without the consent of the copyright owner. |
• | The recording level is not affected by the volume. |
• For | |
| while Mic Mixing is activated. |
• For |
1Select the item you want to change.
(While holding)
Recording from a Disc (for NX-D7)
You can record sound from a disc onto the USB device connected to the USB 2 terminal.
• | You can record the tracks on Audio CDs in digital |
| recording. Sound from discs of other kinds is recorded in |
| analog. |
• | You cannot record sound of DivX, ASF or MPEG files. |
Recording from the Radio/External Equipment (for NX-D7)
Preparation:
• | Connect a recordable USB device to the USB 2 terminal. |
• | To record from the external equipment, connect external |
| equipment to the System. |
What is pairing
To use a Bluetooth audio player for the first time, you need to register the Bluetooth audio player on the
•Once you have registered a device, no pairing operation for the same device is required.
•You can register up to five devices for Bluetooth audio player, and up to other five devices for Bluetooth headphones. If you register the sixth device, registration of the first device is replaced.
•Only one device can be connected at a time.To turn off the sound from the Bluetooth audio player temporarily
Press Bluetooth SETTING repeatedly to select “CANCEL?,” then press ENTER/SET.To resume the sound, press Bluetooth SETTING repeatedly to select “RECEIVE?” then press ENTER/SET.
To change the device to connect
If you have registered several Bluetooth audio players, select which device is to be connected to the System.
6 Enter the PIN code of the headphones on the | If Bluetooth connection cannot be established | ||
System using the number buttons. | Try the following if “CAN’T CNNCT” appears on the | ||
• PIN code is a | display: | ||
the headphones. Refer to the headphones’ manual for | • Set the Bluetooth headphones ready to make connections | ||
details. |
| (refer to the device’s manual for details), press Bluetooth | |
7 Press ENTER/SET to confirm your entry. |
| SETTING repeatedly to select “SEND?” then press | |
“SUCCESS” appears on the display of the System and the |
| ENTER/SET. | |
pairing is completed. |
| Changing the Bluetooth Settings | |
• Sound from the speakers is muted, and you hear sound |
| ||
1 | |||
from the headphones. |
|
| music and your singing is recorded in analog. Sound |
| adjustments for Karaoke are also recorded. |
• | Key Control is not effective during Karaoke recording. |
• | You cannot record tracks while Karaoke Scoring is |
| activated. |
• Repeat Mode cannot be used for recording. | |
• | You cannot record or edit tracks while you are setting My |
| Sound. |
• | You can record up to 999 tracks to the USB device. If you |
| try to record a track after recording 999 tracks, “TRACK |
| FULL” appears on the display and the track will not be |
| recorded. |
• | You cannot start recording into a USB device while |
| “READING” is shown on the display. |
(Audio CD only)
Canceled (Radio or external equipment only)
2Press ENTER/SET, change the setting using the cursor buttons, then press ENTER/SET again.
RECHIGH Recorded at up to 4 times normal speed, depending on the file and quality level
• You can also select analog recording for Audio CDs. |
Before recording...
Connect a recordable USB device to the USB 2 terminal.1Start and stop playback of the disc.2Select the first track you want to start recording with.(Not applicable to DVD andThe System records from the selected track to the last one.
• Make recording settings. |
• You can also give title to the new group before |
Only “SYS INFO?” and “CANCEL?” can be selected when a Bluetooth device is connected to the System.
Listening to Bluetooth Audio Player
Canceled
1Press Bluetooth SETTING repeatedly to select “SELECT DV?” then press ENTER/SET.
The name of the current Bluetooth audio player appears on the display.2Select the device to connect using the cursor buttons, then press ENTER/SET.If Bluetooth connection cannot be establishedTry the following if “CAN’T CNNCT” appears on the display:
•Set the Bluetooth audio player ready to make connections (refer to the device’s manual for details), press Bluetooth SETTING repeatedly to select “RECEIVE?” then press ENTER/SET.
2 sec.
The System starts searching for the headphones.• For some Bluetooth headphones, the System will try to |
Canceled
2Change the settings using the cursor buttons, then press ENTER/SET.CHNG
• | You cannot record tracks into the root folder. |
• | Do not disconnect a USB device while playing/recording/ |
| editing. It may cause malfunction. |
• | Do not vibrate the System while recording tracks. Take |
| care especially while the REC indicator is flashing or while |
| “WRITING” is shown on the display. It may damage the |
| recorded tracks on the USB device. |
The System uses the Serial Copy Management System which allows only
If you try to record from a duplicated
1st generation | 2nd generation |
HQ REC | 192 kbps for MP3 files. |
(High Quality) | 128 kbps for WMA files. |
|
|
SP REC | 128 kbps for MP3 files. |
(Standard Play) | 96 kbps for WMA files. |
LP REC | 64 kbps for MP3 files. |
(Long Play) | 64 kbps for WMA files. |
|
|
• You can divide a continuous recording into several tracks |
by adding track marks. |
(on the main unit)
4Press 4/¢ buttons to select a group to record tracks into.•If you select “FORM GR?”, the System creates the new group.You can also give title to the new group before recording (see the next column).
5 Press USB REC (on the main unit) to start | |
recording. | |
Both recording and playback start at the same time. When | |
playback ends, recording also stops. | |
• | You cannot change the source while recording. |
• | If Program Play is activated, the tracks are recorded in |
recording. See below. |
•For AUDIO IN: Start playback on the connected equipment after pressing USB REC. Recording starts automatically when sound signal is detected on the
•When “MARKING” is set to “MANUAL MARK,” press ENTER/SET at the position you want to divide the recorded track.
6Press 7 to stop recording.To give title to a new group before recordingIf you select “FORM GR?” to record tracks into, you can give a group title before starting to record.
1 After selecting “FORM GR?”, press ENTER/SET. |
Pairing
1Select “Bluetooth” as the source.2Press Bluetooth SETTING repeatedly to select “PAIRING?” then press ENTER/SET.3Operate the pairing procedure on the Bluetooth audio player.•You see the name of the System
•Some Bluetooth audio players are automatically connected to the System after pairing. If not, establish connection manually (see the next column).
Pairing
1Turn on the Bluetooth headphones and set it ready to be found by the System.• See the headphones’ manual for details.2Select a source other than “Bluetooth.”3 Activate Bluetooth transmitter.2 sec.
The Bluetooth indicator starts flashing on the display.4Press Bluetooth SETTING repeatedly to select “SEARCH DV?” then press ENTER/SET.
connect the headphones automatically if the pairing is |
successful. |
•If the Bluetooth headphones support AVRCP profile, you can operate the System (ex. play, pause, stop and skip) by using the keys of the Bluetooth headphones.
•Sound Mode does not affect the sound through the Bluetooth headphones.To turn off the sound from the headphones temporarilyPress Bluetooth SETTING repeatedly to select “CANCEL?” then press ENTER/SET.To resume the sound, press Bluetooth SETTING repeatedly to select “SEND?,” then press ENTER/SET.
To turn off the sound from the headphones
Before selecting “CHNG NAME?” press Bluetooth (for Bluetooth audio player) or hold Bluetooth more than 2 seconds (for Bluetooth headphones).
1Select the device to change the name using the cursor buttons, then press ENTER/SET.
2Enter a new name using the number buttons (see “How to Enter Titles”), then press ENTER/SET to confirm the entry.
DELETE
HIGH | Select this for a better sound quality. |
NORMAL | Select this if the Bluetooth connection is |
(on the main unit)
3Select a group to record the tracks into using4/¢ buttons.4Press CD USB REC (on the main unit) to start recording.When playback ends, recording also stops. To stop recording manually, press 7.
MANUAL | Track mark is recorded when you press |
MARK | ENTER/SET while recording. |
|
|
TIME MARK | Track mark is recorded every 5 minutes. |
AUTO | Track mark is recorded when |
MARK | interval is detected. (You can also record |
| track marks by pressing ENTER/SET.) |
the programmed order. |
• If the remaining time exceeds 10 hours, “_” is displayed |
in the |
To record in analog (for NX-D7)
When digital recording is prohibited, you can record in analog.After step 2, press USB REC (on the main unit) more than 4 seconds.When “ANALOG REC?” is displayed, perform the following procedure from 3.2 Edit the group title using the number buttons. |
• For entering a title, see “Editing Operations.” |
To listen to Bluetooth audio player
1Select “Bluetooth” as the source.
2Press Bluetooth SETTING repeatedly to select “RECEIVE?” then press ENTER/SET.When connection is established successfully, the Bluetooth indicator lights up on the display.
3Start playback on the Bluetooth audio player.You hear music from the speakers of the System.•If the Bluetooth audio player supports AVRCP profile, you can operate it by the System (ex. skip, stop and pause). (Some Bluetooth audio players may not be controlled by the System.)
Canceled
The System starts searching for Bluetooth headphones. The name of the first found device is displayed.
5Select the headphones you want to register using the cursor buttons, then press ENTER/SET.
Press Bluetooth more than 2 seconds to deactivate Bluetooth transmitter. Now sound comes out of the speakers.
To change the headphones to use
If you have registered several Bluetooth devices, select which device is to be connected to the System.
•Turn down the volume to the minimum on the headphones.1Press Bluetooth SETTING repeatedly to select “SELECT DV?” then press ENTER/SET.
2Select the headphones you want to use using the cursor buttons, then press ENTER/SET.
unstable. |
SYS
27 | 28 | 31 | 32 |