ENGLISH FRANÇAIS
SPEAKER SYSTEM
XS-SR1 INSTRUCTIONS
Thank you for purchasing a JVC product.For customer use:Enter below the Model No. and Serial No. which are located either on the rear, bottom or side of the cabinet. Retain this information for future reference.
Model No.Serial No.| 0809WMKMDWJMM | |
| EN, FR |
|
Warnings, Cautions and Others
WARNINGTO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
CAUTION
The 
button in any position does not disconnect the mains line. Disconnect the mains plug to shut the power off completely (the STANDBY lamp goes off).
The MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
•When the System is on standby, the STANDBY lamp lights red.
•When the System is turned on, the STANDBY lamp turns green.
THIS DIGITAL APPARATUS DOES NOT EXCEED THE CLASS B LIMITS FOR RADIO NOISE EMISSIONS FROM DIGITAL APPARATUS AS SET OUT IN THE
Caution: Changes or modifications not expressly approved by party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.– Increase the separation between the equipment and receiver.– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.Declaration of Conformity |
|
| Model Number: | |
| Trade Name: | JVC |
| Responsible Party: | JVC Americas Corp. |
CAUTION
•Do not block the ventilation openings or holes. (If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.)
•Do not place any naked flame sources, such as lighted candles, on the apparatus.
•When discarding batteries, environmental problems must be considered and local rules or laws governing the disposal of these batteries must be followed strictly.
•Do not expose this apparatus to rain, moisture, dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
CAUTION
To reduce the risk of electrical shocks, fire, etc.:1.Do not remove screws, covers or cabinet.2.Do not expose this appliance to rain or moisture.Rating label is placed on the exterior of the bottom.| Address: | 1700 Valley Road, Wayne New Jersey 07470 |
| Telephone Number: |
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
[European Union only]Precautions
•Install the System on a place which is level, dry, and neither too hot nor too cold; between 5°C and 35°C (41°F and 95°F).
•Do not use the System in a location near heat sources, or in a place subject to direct sunlight, excessive dust, or vibration.
•Leave sufficient distance between the System and the TV.•Do not insert any metallic objects or liquids into the System.•There are no
•Stains on the System should be wiped off with a soft cloth. If the System is heavily stained, wipe it with a cloth soaked in water diluted neutral detergent and wrung well, then wipe clean with a dry cloth.
•If water gets inside the System, turn the power off and disconnect the USB cable (or AC adaptor), then call the store where you purchased this System. Using the System in this condition may cause a fire or electrical shock.
•Since the System may deteriorate in quality, become damaged or get its paint peeled off, be careful about the following:
–DO NOT wipe it forcefully.–DO NOT wipe it with thinners, benzines or other organic solvents including disinfectants.
–DO NOT apply any volatile substances such as insecticides to it.
–DO NOT allow any rubber or plastic to remain in contact with it for a long time.
About theConnection
| For supplying the power: |
| CAUTION | |
| |||
• | Connect the System to a computer using the USB cable (supplied), or | DO NOT turn on the computer until all connections have been made. | |
• | Connect an AC adaptor (not supplied). |
|
|
NOTE•Do not use a USB hub to connect the System to a computer.• If you connect both the USB cable and an AC adaptor, connect the AC adaptor first. Otherwise the System may not work correctly.
|
|
|
|
|
|
|
| Digital optical cable |
| Stereo mini plug cable | ||||||||
|
|
|
|
|
|
|
| (not supplied) |
| (not supplied) | ||||||||
| Digital output of an audio |
|
|
|
|
|
| Analog output of | |||||||||||
| player for playing |
|
|
|
|
|
| an audio player | |||||||||||
| digital audio sources* |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| * Compatible signal: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| USB cable (supplied) | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
| (32 kHz, 44.1 kHz, |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| and 48 kHz sampling |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| frequency). No |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| AC adaptor (not supplied) | or USB port of a computer | |||||||||||||||||
| is playable. | ||||||||||||||||||
| Connect the AC adaptor to the wall outlet. | • For supplying the power | ||||||||||||||||
Specifications
Output power:•USB connection0.75W per channel, RMS at 4 Ω at 1 kHz, with 10% total harmonic distortion•AC adaptor connection2.5W per channel, RMS at 4 Ω at 1 kHz, with 10% total harmonic distortionSpeaker
| Speaker: | 4 cm | ||||
| Speaker Impedance: |
|
|
|
| 4 Ω |
Analog Input (ANALOG IN): | 125 mV/50 kΩ | ||||
| Digital Input (DIGITAL IN): | |||||
| USB Input (USB IN): | DC 5 V |
|
| 500 mA | |
|
| ||||
| Power Source: | USB DC 5 V |
|
| 500 mA | |
|
| ||||
| DC 6 V |
| 1 A (DC IN) | ||
|
| ||||
| Dimensions (W × H × D): | 390 mm × 88 mm × 136 mm | ||||
| |||||
| Mass: | 0.5 kg (1.2 lbs) | ||||
| Accessories |
|
|
|
|
|
| USB cable (× 1) |
|
|
|
|
|
*Refer to “How to attach the core filter to the USB cable” on the attached information sheet.
The speakers are magnetically shielded to avoid color distortions on TVs. If the color on a TV is distorted, perform the following procedure:
–Turn off the TV’s main power switch or unplug it before installing the System. Then wait at least 30 minutes before turning on the TV’s main power switch again.
Some TVs may still be affected even though you have followed the above procedure. If this happens, move the System away from the TV.
Troubleshooting
If you have a problem with this System, check this list for a possible solution before calling for service.
Power does not come on.=Connect the USB cable (or AC adaptor) securely. =Turn on the computer connected to the System.
No sound comes out of the speakers.=Adjust the volume level.Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the
Operation
1Turn on the computer.
For details, refer to the Instruction manual of the computer.2Press 
to turn on the power.
The standby lamp turns green.3Press INPUT DIGITAL, INPUT ANALOG or
INPUT USB AUDIO to select the source.
4Start playing back the connected equipment.
5Press VOLUME +/– to adjust the volume.
CAUTION
Set the volume to the minimum level before starting playback. If the volume is set to a high level, the sudden blast of sound may damage your hearing and blow out the speakers.
Enjoying Surround Mode
This System is equipped with Virtual Dolby Surround. In Surround Mode, it creates a rich surround sound effect with two speakers. To activate Surround Mode, press SURROUND MODE 1/2. Pressing the button beeps...
–Once when SURROUND MODE 1 is selected, or–Twice when SURROUND MODE 2 is selected.•SURROUND MODE 1: Creates a surround sound effect.•SURROUND MODE 2: Creates a richer surround sound effectthan SURROUND MODE 1.–To cancel, press SURROUND OFF.Turning off the operation soundsPress and hold SURROUND OFF until the standby lamp flashes twice. The operation sounds are turned off.
•To restore the sounds, press and hold the button until the standby lamp flashes once.
When you use an AC adaptor or a stereo mini plug cable (not supplied), make sure that a core filter is attached to the DC cord end/the stereo mini plug cable end to reduce interference.
If not, attach one of the supplied core filters (small) as shown in the illustration.
Run the cable through the core filter, and wind the cable firmly, twice for DC cord end, once for stereo mini plug cable end, inside the cutout of the core filter.
Core filter (small)DC cord5 cm (2 inches)Core filter (small)
Stereo mini
plug cable
5 cm (2 inches)
2 
3
Standby lamp5
SURROUND MODE buttons
CAUTIONDo not damage the cord by applying excessive force when winding.