Monitoring Audio Sound Using a Headphone

Applicable to: Video shooting mode, video playback mode

Connecting the headphone

Connect the headphone to the headphone ( ) jack.

Headphone Jack

Setting the headphone sound to mixed sound or stereo sound

Menu settings

Set the [AUDIO MONITOR] menu. (A Page 64)

Adjusting the headphone’s audio level

Turn the ADJ./VOL. knob.

 

ACCESS

IRIS

 

OPEN SHUTTER

 

AE±

REC

CLOSE

 

ADJ./ VOL.

PUSH

ADJ./VOL.

 

Knob

DC

 

Time Code Recording Setting

Applicable to: Video shooting mode

Displaying the Time Code/User’s Bit

Menu settings

Set [TC DISPLAY] in the [TC/UB] menu to [TC] or [UB]. TC: Displays the time code.

UB: Displays the user’s bit.

Time Code

Recording the Time Code

The time code of the camcorder’s built-in time code generator as well as user’s bit can be recorded. The time code generator comes in the preset and regeneration modes. When in the preset mode, you can set the time code and user’s bit freely. (A Page 42)

Recording time code and user’s bit in the preset mode

Menu settings

Set [TC GENE.] in the [TC/UB] menu to [FREE] or [REC].

FREE

: The time code operates in the run mode at all

 

times.

REC

: The time code operates in the run mode only

 

during recording.

Recording time code in continuation of the recorded time code on the SD card

Menu settings

Set [TC GENE.] in the [TC/UB] menu to [REGEN].

Memo :

●When recording is stopped and the SD card is removed, the time code will be displayed as follows.

[REC], [REGEN] : Time code generated when the

 

recording was last stopped.

[FREE]

: Operates in the run mode at all times.

 

 

41