Move the viewpoint.

Enlarging a Still Image

Make use of the remote control.

Memo :

●This function is not available on the camcorder unit.

●To use the remote control, set [REMOTE] in the [CAMERA SETTINGS] menu to [ON].

1. Set to the still mode during the video playback mode.

When in the still picture playback mode, display the still picture on the full screen.

2. Press zoom (T) on the remote control.

●The image is enlarged and a sub screen appears at the bottom right corner.

●The original image is shown on the sub screen.

●The image is enlarged based on the position of the viewpoint. Moving the viewpoint also moves the main screen.

Adjusting the Volume of the Built-In Speaker or Headphone

Audio sound is not output from the built-in speaker if a headphone, the A/V OUT terminal, or HDMI terminal is connected.

When using a headphone

Connect the headphone to the headphone ( ) jack.

Headphone Jack

Adjusting the audio level of the built-in speaker or headphone

Sub

Screen

Viewpoint

3. Press zoom (T) on the remote control to enlarge the image.

4.

Press the cross-shaped buttons on the remote control to move the viewpoint.

5. Press zoom (W) on the remote control to reduce the image. (Zoom-out)

Zooming out continuously restores the image to its original size. The sub screen also disappears.

Turn the ADJ./VOL. knob.

IRIS

OPEN SHUTTER

AE±

 

CLOSE

 

ADJ./ VOL.

PUSH

ADJ./VOL.

Knob

ACCESS

REC

DC

Zoom

Cross-shaped Buttons

SET

47