Editing Files

Enabling/Disabling File Protection

Applicable to: Video playback mode, still picture playback mode

You can enable or disable the file protection feature, which helps to prevent a video or still picture file from being deleted. The file protection feature is indicated on the camcorder as follows.

Enable protection

:

“Append OK mark”

Disable protection

:

“Delete OK mark”

Specifying Selected Files

1. Select [FILE SELECT] in the [OK MARK] menu, and press the center of the Set Lever.

●The OK MARK selection screen appears. OK Mark

OK MARK

1/10

 

OK

 

 

 

SELECTSET MENU QUIT

There are four ways to append/delete the OK mark.

●Specify files individually

●Specify selected files

●Append to all files

●Delete from all files Preparation

Insert an SD card.

Set to the video or still picture playback mode. Set the OK mark in the [OK MARK] menu.

[OK MARK]: (A Page 69)

2. Select the files to append or delete the OK mark.

Push the Set Lever up/down or to the left/right to select a file.

Press the center of the Set Lever.

●An OK mark is appended to or deleted from the selected file.

You can repeat the above steps to select multiple files.

Memo :

●Files in the Others group cannot be specified.

Specifying Files Individually

1. Select the file to append or delete the OK mark on the index screen.

●Files that are protected are indicated by an OK mark.

2. Select [CURRENT] in the [OK MARK] menu, and press the center of the Set Lever.

●A confirmation screen appears.

ADD OK MARK?

(ADD PROTECTION)

YES

NO

SELECT SET MENUQUIT

3. Press the MENU button.

●A confirmation screen appears.

MENU

4. Select [YES] to execute.

Push the Set Lever up or down to select [YES]. Press the center of the Set Lever.

●Execution starts. Returns to the index screen or full screen display at the end of the process.

TPush the Set Lever to the left or right to move to the next or previous file.

3. Select [YES] to execute.

Push the Set Lever up or down to select [YES]. Press the center of the Set Lever.

●Execution starts. A message appears at the end of the process.

4. Press the center of the Set Lever.

●Returns to the [OK MARK] menu screen.

50