Charging the Battery Pack
Attach the battery pack.
The battery pack is not charged at the time of purchase.
Connect the DC connector. Cover 
| Mark |
|
| Align the top of the battery | AC Adapter |
| with the mark on this unit, | |
| and slide in until the | To AC Outlet |
| battery clicks into place. | (110 V to 240 V) |
| To detach the battery pack |
|
| (Base) | Plug in the power. |
| |
| Charging Lamp |
| Charging in |
| progress: Blinks |
| Charging finished: |
| Goes out |
0 If you use any other battery packs besides JVC battery packs, safety and performance cannot be guaranteed.
0 If malfunctions (overcurrent, overvoltage, transmission error, etc) occur, or if any battery manufactured other than JVC is attempted for battery charge, charging stops. In these cases, the CHARGE lamp blinks quickly for notification.
0 You can record or play back videos while the AC adapter is connected. (Battery charging cannot be performed during recording or playback.)
Remove the battery when the unit is to be used for a long time. Performance of the battery may drop if it is left attached to the unit.
0 The estimated charging time of the supplied battery pack is approximately 2 hour 30 minutes.
0 The charging time is when the unit is used at 25°C (77°F). If the battery pack is charged outside the room temperature range of 10°C to 35°C (50°F to 95°F), charging may take a longer time or it may not start. CHARGE lamp blinks 2 times in a slow cycle for notification if the battery charge does not start. Also, please note that the recordable and playable time may be shortened under some usage conditions, such as at low temperature.
5