Troubleshooting

The camera is a microcomputer-controlled device. External noise and interference (from a TV, a radio, etc.) might prevent it from functioning properly.

The following phenomena are not malfunctions.

The camera heats up when it is used for a long time.

The battery heats up during charging.

When playing back a video file, the image stops momentarily or the sound is interrupted at junctions between scenes.

To solve the problem, first follow the instructions below.

If the problem is not solved, reset the camera. ( below)

If the problem persists, please consult your nearest JVC dealer.

8 To reset the camera

1)Set the power/mode switch to OFF and remove the power supply (battery pack or AC adapter) from the camera, then reattach it.

2)Execute [PRESET] from the menu. ( pg. 70)

Power

Trouble

Action



 

Connect the AC adapter securely.

16

 

No power is supplied.

Detach the battery pack once again and re-attach it firmly.

16

 

Replace the dead battery with a fully charged one.

 

If the camera is not operated for 5 minutes while the

 

power is on, it turns itself off automatically to conserve

 

 

power. To turn the camera on again when using the

 

 

battery pack, set the power/mode switch to OFF, then to

 

No display appears.

STANDBY/ON. When using the AC adapter, perform any

 

operation such as zooming.

 

 

 

 

Adjust the brightness of the LCD monitor or viewfinder.

70

 

When using the viewfinder, the LCD monitor is opened.

71

 

Either close the LCD monitor, or set the [PRIORITY

 

 

SETTING] to [FINDER].

 

 

Move to a place where no vibration or excessive sound.

The power was turned

The drop detection function operated. Set the power/

70

off accidentally.

mode switch to OFF, and to STANDBY/ON again. To turn

 

 

off this function, set [DROP DETECTION] to [OFF].

 

The displayed amount

Fully charge the battery, and then run it down. If the

16

of remaining battery

problem persists, the battery is worn out and needs to be

 

power differs from the

replaced. Please purchase a new one.

 

actual operating time.

 

 

The power does not

Make sure to use the camera under appropriate operating

80

turn on, or the battery

temperatures.

 

operation time is

The battery is worn out and needs to be replaced. Please

extremely short even

purchase a new one.

 

after the battery is

 

 

fully charged.

 

 

The access/charge

Charging is difficult in places subject to extremely

high/low temperatures. To protect the battery, it is

 

lamp on the camera

recommended to charge it in places with a temperature

 

does not light during

of 10°C to 35°C (50°F to 95°F).

 

charging.

When the battery is already fully charged, the lamp does

18

 

not light. Check the remaining battery power.

 

74