Warning Indications

 

 

Indication

 

 

 

 

 

 

 

 

 

 

Meaning/Action

 

 

 

 

 

 



 

 

 

Displays the remaining battery power.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(Battery indicator)

High

Exhausted

 

 

 

As the battery power comes close to nil, the battery

 

 

 

 

 

 

indicator blinks. When the battery power is exhausted,

 

 

 

 

power turns off automatically.

 

 

 

 

 

 

 

 

 

 

Appears when the date/time is not set.

 

 

 

 

 

 

17

 

 

 

The built-in clock’s rechargeable lithium battery is

16

SET DATE/TIME!

discharged, so the previously set date/time is erased.

 

Connect the camera to an AC outlet using the AC adapter

 

 

 

 

 

 

 

 

for over 24 hours to charge the clock’s lithium battery. Then

 

 

 

 

set the date/time.

 

 

 

 

 

 

 

LENS COVER

Appears for 5 seconds after power is turned on in recording

 

 

 

mode if the lens cover is closed or when it is dark.

 

HDD ERROR!

Remove the card once and insert it again. At this time,

19

switch the camera’s power on after inserting the SD card. If

 

MEMORY CARD

the error is not cancelled, replace the card with one that has

 

ERROR!

been guaranteed for correct operation.

 

 

 

 

 

 

 

 

 

 

Perform clean up to restore the capacity of the recording media.

72

CHECK CARD’S WRITE

Appears when you attempt recording when the write/erase

38

PROTECTION SWITCH

protection tab on the SD card is set to the “LOCK” position.

 

VIDEO MANAGEMENT

The video management file is broken. Recovery is required

FILE IS BROKEN. TO

to record or play back video files. Move the set lever to ¡ /

 

RECORD/PLAYBACK

¢ to select [YES], then press down to recover the video

 

VIDEO, RECOVERY IS

management file.

 

 

 

 

 

 

 

REQUIRED. RECOVER?

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CAN NOT READ EVENT

Appears when the event information cannot be read.

INFORMATION

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The writing speed of recording medium is slow, or the

19

 

 

 

recording medium is corrupted. Use an SD card that is

 

 

 

 

guaranteed to operate.

 

 

 

 

 

 

 

RECORDING FAILURE

The recording medium was subjected to vibrations or jolts.

Be careful not to subject the recording medium to vibrations

 

 

 

 

or jolts.

 

 

 

 

 

 

 

 

 

 

Appears when the recording medium is full and recording

38

 

 

 

is not possible. Delete unnecessary files, or replace the SD

 

 

 

 

card.

 

 

 

 

 

 

 

 

 

 

Appears when an incompatible USB device is connected to

INCOMPATIBLE USB

the camera.

 

 

 

 

 

 

 

Appears when a DVD burner that is switched off is

DEVICE

connected. If you want to use the DVD burner, switch the

 

 

 

 

 

 

 

 

power on.

 

 

 

 

 

 

 

78