Troubleshooting

Before requesting service, consult the following chart or the “Troubleshooting” section in the Detailed User Guide.

If the solutions indicated in the chart do not solve the problem, consult your nearest JVC dealer or JVC service center for instructions. Refer also to the FAQ of new products on JVC’s website.

Refer also to the Q&A information of new products on JVC’s website (http:// www.jvc.com).

This unit is a microcomputer-controlled device. Electrostatic discharge, external noise and interference (from a TV, a radio, etc.) might prevent it from functioning properly. In such a case, reset this unit.

■Reset this unit when it does not function properly or when “...

Error” appears on the screen.

①Turn off the power. (Close the LCD monitor.)

②Remove the AC adapter and battery pack from this unit, reattach them, and turn on the power again.

Recording Getting Started

Troubleshooting

 

Trouble

 

 

 

 

 

 

 

 

 

 

Power

POWER/CHARGE lamp

 

starts blinking when the

 

 

 

 

monitor is closed.

 

ActionPage

● The battery pack is being charged.

6

Playback

Recording

Recording/snapshot cannot be performed.

Recording stops by itself.

● Check the A / B mode.

13

● Set to the recording mode with the L

15

button.

 

● Insert a commercially available SD

 

 

8

card.

 

● Recording stops automatically after 12

-

hours of non-stop recording.

 

● The media used for recording is out of

-

space. To ensure continuous

 

recording, set “SEAMLESS

 

RECORDING” to “ON” before you start

 

recording. The unit switches to another

 

media and records continuously

 

without frame loss.

 

 

 

OthersCopying

For more information, refer to the Detailed User Guide

25

http://manual.jvc.co.jp/index.html/