Troubleshooting

If you encounter problems with this unit, check the following before requesting service. 1 Refer to “Trouble” below.

2 Refer to the “Troubleshooting” section in the “Detailed User Guide”.

If you have difficulties operating the unit, refer to the detailed descriptions in the “Detailed User Guide”.

0http://manual.jvc.co.jp/index.html/0You can also access the website from the supplied CD-ROM. (p. 19)3 Refer to the FAQ of new products on JVC’s website.0http://www.jvc.com/

4This unit is a microcomputer-controlled device. Electrostatic discharge, external noise and interference (from a TV, a radio, etc.) might prevent it from functioning properly.

In such a case, reset the unit.A Turn off the power. (Close the LCD monitor.)

BRemove the AC adapter and battery pack from this unit, reattach them, and this unit powers on automatically.

5If the above do not solve the problem, consult your nearest JVC dealer or JVC service center.

Trouble

Playback Recording Getting Started

Recording Power

Playback

Trouble

POWER/CHARGE lamp starts blinking when the monitor is closed.

Recording cannot be performed.

Recording stops automatically.

No date/time display.Sound or video is interrupted.
Action0The battery pack is being charged.0Set to the recording mode with the L(Play/ Record) button.

0Turn off this unit, wait for a while, and turn it on again.(Thisunitstopsautomaticallytoprotectthe circuit when the temperature rises.)

0Recording stops automatically after 12 hours of continuous recording.0Set “ON-SCREEN DISPLAY” in the playback menu accordingly.

0Sometimes playback is interrupted at the connecting section between two scenes. This is not a malfunction.

Page

6

13

-

-

-

-

Further Information Copying

For more information, refer to the Detailed User Guide

23

http://manual.jvc.co.jp/index.html/