20 EN Still Image Recording

Preparation: Open the LCD monitor. ( pg. 10)

1 Set the power switch to .

Slide while pressing down the lock button.

Power off

Playback

Recording

Lock button

Zoom Lever

2Set the MODE switch to .

: Video mode

: Still image mode

The camera is programmed to record still images on the built-in hard disk when it is shipped from the factory. To change the recording medium, see page 15.

3 Press the REC/SNAP button to start recording.0 FINEPHOTO

 

The PHOTO indicator appears during

 

recording.

 

To check how the image looks before

 

recording, press the REC/SNAP button

 

halfway and hold. The indicator

 

appears and becomes green when the

LIGHT/INFO

captured image is focused. To cancel the

recording, release the REC/SNAP button.

 

 

To record it on the recording medium,

 

press the REC/SNAP button fully.

To change the picture quality ( pg. 55)

NOTES:

Still images are recorded at 4:3 mode. They cannot be recorded at 16:9 mode.

If the camera is not operated during recording or playback for 5 minutes when using the battery pack, it turns itself off automatically to conserve power. To turn the camera on again, set the power switch to

OFF, then to or . When using the AC adapter, the camera enters the sleep mode (the access lamp lights and the LCD monitor turns off). To cancel the sleep mode, perform any operation such as zooming.