Necessary Settings before Use

Access/Charge Lamp

MENU

Set Lever

Power/Mode Switch

Be sure to confi gure the following three settings before use.

2 Attach the battery pack.

Slide the battery pack down until it locks in place.

Bottom of the Camera

BATT.

3 Connect the AC adapter.

DC

Connector

AC Adapter

Charging the Battery Pack

1 Set the power/mode switch to OFF.

Slide while pressing down the lock button.

MODE

ON

OFF (CHARGE)

To AC Outlet (110V to 240V)

•You can also connect the AC adapter using the Everio dock connector. ( pg. 6)

•The access/charge lamp blinks to indicate charging has started.

•When the lamp goes out, charging is

fi nished. Unplug the AC adapter from the AC outlet and disconnect the AC adapter from the camera.

Required charging / recording time (approx.)

The values within ( ) are the times when the LED light is on.

Battery pack

Charging time

Recording

time

 

 

BN-VF808U

1 hr. 30 min.

1 hr. 15 min.

(Provided)

(1 hr. 10 min.)

BN-VF815U

2 hr. 40 min.

2 hr. 30 min.

(2 hr. 25 min.)

BN-VF823U

3 hr. 50 min.

3 hr. 45 min.

(3 hr. 35 min.)

12

8 To detach the battery pack

Slide and hold BATT. ( step 2), then remove the battery pack.

8 To check the remaining battery power

See page 14.

NOTES

•You can also use the camera with just the AC adapter.

•Please do not pull or bend the AC adapter plug and cable. This may damage the AC adapter.