14 EN

Necessary Settings before Use

 

Be sure to configure the following three settings

3 Charge the battery pack by

before use.

connecting to the AC adapter.

 

 

Power Related Preparations

Open the cover.

(Using the Battery Pack)

 

1

2

Set the power switch to OFF.

Slide while pressing down the lock button.

Power off

Playback

Recording

Lock button

Attach the battery pack.

Slide the battery pack down until it locks in place.

Bottom of the Camera

BATT.

DC

Connector

To AC Outlet (110V to 240V)

AC Adapter

(ex. AP-V17E)*

*If the provided AC adapter is AP-V14E, connect the power cord to the AC adapter, and plug the power cord into an AC outlet.

The power/charge lamp blinks to indicate charging has started.

When the lamp goes out, charging is finished. Unplug the AC adapter (or the power cord) from the AC outlet and disconnect the AC adapter from the camera.

Controls in this section

Power/Charge Lamp

Power Switch

INDEX / / / / 49 MENU

To detach the battery pack

Slide and hold BATT. ( step 2), then remove the battery pack.

To check the remaining battery power ( pg. 16)

Required charging / recording time

Battery pack

Charging time

Recording

time

 

 

BN-VF707U

1 hr. 30 min.

1 hr. 10 min.

(Provided)

(1 hr. 5 min.)

 

 

 

 

BN-VF714U

2 hr. 40 min.

2 hr. 25 min.

(2 hr. 20 min.)

 

 

 

 

 

BN-VF733U

5 hr. 40 min.

5 hr. 50 min.

(5 hr. 30 min.)

 

 

 

 

 

The times shown above are approximate times. The values within ( ) are the times when the LED light is on.

NOTE:

You can also use the camera with just the AC adapter.