problems Other
The lamp does not flash during battery pack charging.
The slider and operation buttons do not work.
This unit heats up.
●Check the remaining battery power. (When the battery pack is fully charged, the lamp does not flash.)
●When charging in either a hot or cold environment, ensure that battery is being charged within the permitted temperature range. (Otherwise, charging may stop to protect the battery pack.)
●Remove any gloves.
●Touch the slider and buttons with your fingers to operate. (They do not function if you touch them with your fingernails or pen tips.)
●This is not a malfunction. (This unit may become warm when used for a long time.)
P.10 | Started |
| |
P.6 | Getting |
| |
- | Recording |
- | |
- | |
|
Warning Indications
Warning Indications
RECORDING FAILURE
Action
●Turn off and on this unit again.
●Set “REC MEDIA FOR VIDEO” in the media settings menu to “SD”. (Records on the microSD card.)
●Make use of a file recorded with this unit. (Files recorded with other devices may not be playable. If the file was recorded with this unit, then it is corrupted.)
Page | Playback |
- | |
P.13 | |
- | |
|
UNSUPPORTED SCENE! (Video)
UNSUPPORTED FILE! (Still image)
DATA RECORDED IS TOO LITTLE UNABLE TO SAVE
CAMERA TEMPERATURE IS TOO COLD KEEP CAMERA POWER ON PLEASE WAIT
●Make use of a file recorded with this unit. (Files recorded with other devices may not be playable. If the file was recorded with this unit, then it is corrupted.)
●If a video recording is stopped with the actual recording time displayed at “0:00:00:17” and below, the video cannot be saved.
●Leave this unit turned on for a while.
If the warning still does not disappear, turn off the power and move the unit to a warm place while taking care to avoid a sudden temperature change. Turn on the power again after a while.
- | Copying |
- | |
- |
|
| Further Information |
For more information, refer to the Detailed User Guide | 27 |
http://manual.jvc.co.jp/index.html/ |