Necessary Settings before Use

Charging the Battery Pack

1 Close the LCD monitor to turn off the camcorder.

2 Attach the �������battery �����pack.

Slide the battery pack down until it locks in place.

Bottom of the Camcorder

BATT.

3 Connect the AC adapter.

DC Jack

Charge lamp

AC Adapter

To AC Outlet (110V to 240V)

The charge lamp blinks to indicate charging has started.

When the lamp goes out, charging is finished. Unplug the AC adapter (or the power cord) from the AC outlet and disconnect the AC adapter from the camcorder.

LTo detach the battery pack

Slide and hold BATT. (Z step 2), then remove the battery pack.

LTo check the remaining battery power See page 15.

NOTES

You can also use the camcorder with just the AC adapter.

Please do not pull or bend the AC adapter plug and cable. This may damage the AC adapter.

Date/Time Setting

1 Open the LCD monitor to turn on the camcorder.

2 When [SET DATE/TIME!] appears, select [YES] within 10 seconds.

If you do not select within 10 seconds, the screen disappears. In such case, press the power button () and turn the camcorder on again.

3 Set the date and time.

Repeat this step to input the month, day, year, hour and minute.

4 Touch the OK button to finish.

LTo change the date and time

1)Touch the MENU button.

2)Select [BASIC SETTINGS], and then [CLOCK ADJUST].

3)Set the date and time.

LTo return to the previous screen Select @.

LTo quit the screen Touch the MENU button.

14