Other Settings

Checking the Remaining Battery Power

Preparation:

•Attach the battery pack.

•Press the SELECT PLAY/REC button to select recording mode.

For ! mode:

Press the INFO button twice or the INFO button and then select ;.

For # mode:

Press the INFO button.

DIRECT DVD

$#66'4;%10&+6+10

/#: 6+/'

OKP

INFO

37+6

LTo return to the normal screen Press the INFO button again.

NOTES

•If “COMMUNICATING ERROR” appears, there may be a problem with your battery. In such a case, consult your nearest JVC dealer.

•The recordable time display should only be used as a guide. It is displayed in 10 minute units.

When Using an SD Card

If you want to record to an SD card, the following operations need to be performed.

•Operations are confirmed on the following SD cards.

Class 4 or higher compatible SD or SDHC card

Panasonic, TOSHIBA, SanDisk, ATP SD card (256 MB to 2 GB) or SDHC card (4 GB to 16 GB)

•If other media are used, they may fail to record data correctly, or they may lose data that had already been recorded.

•MultiMediaCards are not supported.

•Cards used to record video on this camcorder cannot be played back on other devices.

•Some card readers (including internal card readers in PCs) may not be able to support SDHC format. If you use an SDHC card for recording and encounter any reading error, the card reader you are using, might be a non-SDHC supported device. Please use the camcorder or other SDHC compatible devices to access the card.

Q Insert an SD card

ENGLISH

 

Close the LCD monitor to turn off the camcorder.

Preparation:

 

1 Open the SD card cover.

Bottom of the

Camcorder

2 Firmly insert the card with its clipped edge first.

Clipped Edge

3 Close the SD card cover.

LTo remove an SD card Push the SD card once.

After the card comes out a little, pull it out.

NOTES

•Insert and remove the SD card only while the power is turned off. Otherwise, data on the card may be corrupted.

•Do not touch the terminal on the reverse side of the label.

RFormat an SD card when using it for the first time

This will also ensure stable speed and operation when accessing the SD card.

Select [FORMAT SD CARD] from the MENU.

15