Charging the Battery Pack

Open the battery cover.

 

 

Connect the DC connector and

 

 

 

 

 

 

 

plug in the power.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(Base)

Attach the battery pack.

Align the terminal of the battery pack with this unit.

Close the battery cover.

Charging Lamp

Charging in progress:

Blinks

Charging finished:

Goes out

The battery pack is not charged at the time of purchase.

To detach the battery pack, perform the above steps in reverse order.

If it is difficult to detach the battery pack, open the SD card cover. (p.6) To attach any other battery packs besides the supplied one, open the SD card cover before attaching. (p.6 )

CAUTIONBe sure to use JVC battery packs.

0 If you use any other battery packs besides JVC battery packs, safety and performance cannot be guaranteed.

0 If malfunctions (overcurrent, overvoltage, transmission error, etc) occur, or if any battery manufactured other than JVC is attempted for battery charge, charging stops. In these cases, the CHARGE lamp blinks quickly for notification.

0 You can record or play back videos while the AC adapter is connected. (Battery charging cannot be performed during recording or playback.)

Remove the battery when the unit is to be used for a long time. Performance of the battery may drop if it is left attached to the unit.

0 The estimated charging time of the supplied battery pack is approximately 3 hour 30 minutes.

0 The charging time is when the unit is used at 25°C (77°F). If the battery pack is charged outside the room temperature range of 10°C to 35°C (50°F to 95°F), charging may take a longer time or it may not start. CHARGE lamp blinks 2 times in a slow cycle for notification if the battery charge does not start. Also, please note that the recordable and playable time may be shortened under some usage conditions, such as at low temperature.

5