JVC HD-Z56RX5 manual „ Move, „ Manual, „ Delete, „ Id, „ Insert

SET UP menu

ENGLISH

„MOVE

1 Press the 6 buttons to choose a TV channel

2 Press the 3 button to start the MOVE function

> EDIT

PR ID CH/CC

CH 21

OK

STORE

3Press the 6 buttons to choose “CC” or “CH” according to the CH/CC number of the TV channel

To cancel the INSERT function:

Press the bbutton.

4Press the number buttons to enter the remaining CH/CC number

The TV shifts to registration mode. When the registration is completed, the picture of the TV channel appears on the screen.

•The CH/CC number is a number given to each broadcast frequency that carries a TV channel. If the TV cannot detect the TV channel corresponding to the broadcast frequency indicated by the CH/CC number, a “no-signal” picture appears.

„MANUAL

3Press the 6 buttons to choose a new programme number (PR)

To cancel the MOVE function:

Press the bbutton.

4Press the 2 button to change the programme number (PR) of a TV channel to a new programme number (PR)

„DELETE

1Press the 6 buttons to choose a TV channel

2Press the yellow button to delete the TV channel

The TV channel is deleted from the programme numbers (PR) list.

„ID

1Press the 6 buttons to choose a TV channel

2Press the red button to start the ID function

3Enter a channel name (ID). Press the 6 buttons to choose a character. Press the 5 buttons to move the cursor

> EDIT

PR ID CH/CC

M

OK

To cancel the ID function:

Press the bbutton.

4Press the a button to give a channel name to a TV channel

Before performing INSERT operation

•A CH/CC number unique to this TV and corresponding to the Channel number of a TV channel is required. Find the corresponding CH/CC number from a table “Troubleshooting” on page 26 based on the Channel number of the TV channel.

1Press the 6 buttons to choose a programme number (PR) for a new TV channel

2Press the blue button to activate the MANUAL function

At the right side following the CH/CC number, the SYSTEM (sound system) of the TV channel appears.

> MANUAL

PR ID CH/CC

(B / G)

SEARCH+ FINE-

OK SYSTEM

SEARCH- FINE+

To cancel the MANUAL function:

Press the bbutton.

3Press the 3 button to choose the SYSTEM (sound system) for a TV channel you want to register

•For the sound systems in each country or region, refer to the table below:

Area	Country or Region	System
	Bahrain, Kuwait, Oman, Qatar, United Arab Emirates,	B/G
	Yemen, etc.
Asia,	Indonesia, Malaysia, Singapore, Thailand, India, etc.
	China, Vietnam, etc.	D/K
Middle
East	Hong Kong, etc.	I
	Islamic Republic of Iran, Lebanon, Saudi Arabia, etc.	B/G
	Philippines, Taiwan, Myanmar, etc.	M
	Russia, etc.	D/K
Europe	Czech Republic, Poland, etc.	D/K
	Germany, Holland, Belgium, etc.	B/G
	UK, etc.	I
Oceania	Australia, New Zealand, etc.	B/G
	Republic of South Africa, etc.	I
Africa	Nigeria, etc.	B/G
	Egypt, Morocco, etc.	B/G

4Press the green or red button to search for a TV channel

Scanning stops when the TV finds a TV channel. Then the TV channel is displayed.

„INSERT

1Press the 6 buttons to choose a programme number (PR) for which you will register a new TV channel

2Press the green button to start the INSERT function

> EDIT

PR ID CH/CC

OK 0 9

CH/CC

5Press the green or red button repeatedly until the TV channel you want appears

If the TV channel reception is poor:

Press the blue or yellow button to fine-tune the TV channel.

If you cannot hear the normal sound even when the picture of the TV channel appears normally:

The SYSTEM setting is wrong. Press the 3 button and choose a SYSTEM that has normal sound.

6Press the a button and register the TV channel to a Programme number (PR)

The normal EDIT menu is resumed.

22