Connecting the microphone | 4. |
To connect an external microphone to the camera, first select the audio input and choose the type of input using the controls. Move the switch to Mic for microphones that use their own power supply, or switch to Mic+48V for microphones that draw power from the camera.
The camera’s audio controls are located on the left side, at the tip of the handle. The XLR inputs are on the opposite side, under the microphone holder.
Then plug the XLR cable to one of the inputs selected, either 1 or 2 on the opposite side of the controls.
Make sure the arrow on the XLR Connector is pointing towards the PUSH button on the camera, then push the connector forward until a clicking sound is heard.
To disconnect, press the PUSH Button on the camera then pull out while holding the end of the connector cable.
T u g g i n g t h e cable may cause it to malfunction
Turn the Audio Select switch to Manual and use the Audio Level knob to control each individual mic level.
!"#$%&'%