Page 8 September 3, 2001 9:09 am
Timer RecordingUp to 8timer recording programs can be made using Express
timer programing metho d as far as a year in advance. Remember,
the clock must be set before you can program the timer.
NOTES:
●If all the 8 programs have already been set , “PROGRAM FULL”
appears on the TV screen.
●After timer recording is comple ted, the recorde r turns off
automatically.
●You can program the timer recording while a regular recording
is in progress; the menu scree ns will not be recorded.
●In case of a power failure after programing, the recorder’s
memory backup keeps your selections (if the lithium battery is
not exhausted).
Express Timer Programing
●Remember, the clock must be set before you can program the
timer.
●Load a cassette with the record safety tab intact. The recorder
turns on, and the counter is reset, automaticall y.
●Select the appropriate colour system with “PAL/M ESECAM” and
“NTSC” in Function settings.
APress PROG on the remote control to access the Program
screen.
BPress START+/–, STOP+/–, DATE+/–
or PR+/– repeatedly to enter the start
time, stop time, date or channel.
●Press and hold START+/– or
STOP+/– to increase the time in
30-minute intervals.
●To set the tape speed, press SP/LP/
EP (p
).
●To timer-record daily (Monday–Friday) or weekly serials,
press DAILY or WEEKLY. Pressing the button again makes the
“DAILY” or “WEEKLY” display disappear.
CPress OK or PROG.
●If “PROGRAM OVERLAPPED” appears, see “Program
overlap warning display”.
DPress #. The recorder turns off au tomatically and “#” is
displayed on the disp lay panel.
NOTE:
●If the tape reaches its end during re cording, the recording stops
and “#”, “䡬” and “$” on the front display panel blink.
To use the recorder while it is in
timer recording standby mode
Press #, then press 1. After you use the recorder, press # again
to put the recorder into timer recording standby mode.
Checking, cancelling or changing
program settings
ADisengage timer
Press #, then press 1.
●When “AUTO TIMER” is set to “ON”, you do not have to press
#.
BAccess Program Check screen
Press ".
NOTE:
When the weekly serials are programed, a
day of the week appears, when the daily
serials are programed, “DAILY” appears.
CAccess Program screen
Press " again. Each time you press ",
the next program’s Program screen
appears.
DCancel or change program setting
To cancel a program, press & when the Program screen you do
not want is shown.
To change a program, press the appropriate button: START+/–,
STOP+/–, DATE+/–, PR+/–, and/or SP/LP/EP (p
) when the
Program screen on which you want to make changes is shown.
EReturn to normal screen
Press " repeatedly until no Program screen is shown.
FReengage timer recording standby mode
Press #. The recorder turns off automatically and “#” is displayed
on the display panel.
●When “AUTO TIMER” is set to “ON”, the timer re cording
standby mode automatically resumes when you turn off the
recorder.
[+/–]
[PROG] : EXIT
– P1 –
START STOP
8:00 10:00
SP
DATE TV PROG
24.04 3
[ ] : NEXT
PR START STOP CH DATE
1 8:00 10:00 3 24.04
210:00 10:45 225.04
311:30 13:00 1 25.04
4
5
6
7
8
[ ] : NEXT
– P1 –
START STOP
8:00 10:00
SP
DATE TV PROG
24:04 3