Playing back tape repeatedly (100 times)

Repeat Play

During playback, press and hold PLAY (4) for more than
5seconds. The play indicator ($) on the display panel starts
blinking slowly. To stop playback, press STOP (
8
)
on the Remote
or STOP/EJECT (
0
)
on the VCR.

Locating beginning of recordings

Index Search

Index codes are placed on the tape at the beginning of each
recording when recording on this VCR.
AWhile the tape is not running, press SHUTTLE PLUS 2 or
6 on the Remote to start search.
BTo access a recording of 2 to 9index
codes away, press 2 or 6
repeatedly until the correct number is
displayed on the screen (only if
SUPERIMPOSE is set to ON).
Playback begins automatically when
the desired recording is located.

Locating beginning of timer recordings

Instant Review

Press REVIEW on the Remote after ensuring that the VCR is in the
timer recording standby mode.
The VCR turns on, and rewinds to the index code indicating the
beginning of the last timer-recorded program, then begins
playback automatically.
You can access a program of 2 to 9index codes away from the
current position on the tape. If, for example, you have
5programs recorded and you want to watch the third one, press
REVIEW three times.
The Instant Review function will also operate if the VCR is
turned on.

Skipping unwanted portions

Skip Search

Press SKIP SEARCH on the Remote once to 4times during
playback. Each press initiates a 30-second period of high speed
playback (up to 2minutes). When the specified portion of the tape
is skipped, normal playback resumes automatically. To return to
normal playback during Skip Search, press PLAY (4).
Recording
It may be unlawful to record or play back copyrighted material
without the consent of the copyright owner.
Accidental erasure prevention
To prevent accidental recording on a
recorded cassette, remove its record
safety tab. To record on it later, cover
the hole with adhesive tape.

Basic Recording

ALoad a cassette
Make sure the record safety tab is intact. If not, cover the hole
with adhesive tape before inserting the cassette.
The VCR turns on, and the counter is reset, automatically.
BSelect recording channel
On the Remote
Press CH+/ or the Number keys.
On the VCR
Press PAUSE[CH]. The channel display on the
display panel starts blinking. While the display is
blinking, press FF[CH+] or REW[CH] to select
channel. After about 5seconds, the channel display
stops blinking.
NOTES:
You can select channel in the stop mode,
recording pause mode or during rewind/fast-
forward.
If no cassette is loaded, or during recording pause
mode, you can select channel only by pressing
FF[CH+] or REW[CH].
If you connect the TV and the VCR only using the
RF connection, press TV/VCR on the Remote so
that the VCR mode indicator lights on the display
panel, to view the program to be recorded.
CSet tape speed
Press SP/EP on the Remote. The selected tape speed will appear
on the TV screen and the VCR display panel.
NOTE:
You can select tape speed in the stop mode or during recording
pause mode.
DStart recording
On the VCR, press REC (7). Or on the Remote, while holding REC
(7), press PLAY (4).
NOTE:
If the tape reaches its end during recording, the recording stops
and and $ on the front display panel blink. Press STOP/
EJECT (
0
) on the VCR to eject the tape or press REW (
3
) to
rewind the tape.
INDEX 1
2nd next
Beginning of the
current program
recorded
Current
position on
the tape
Beginning of the
2nd next program
recorded
Previous
program
recorded
Next
program
recorded
During recording
Pause recording
Press PAUSE (9).
Press PLAY (4) to resume recording.
You can select channel in the recording pause mode.
Stop recording
Press STOP (
8
)
on the
Remote. OR Press STOP/EJECT (
0
)
on
the VCR.
Record safety tab
Playback