JVC HR-J794EU specifications Initial Settings, Auto Set Up, Preset Download, Language Set

Initial Settings

After the 1 is pressed for the first time to power on the recorder, the recorder starts Auto Set Up or Preset Download.

ATTENTION:

If you have connected the recorder to a TV offering T-V Link via a fully-wired 21-pin SCART cable and if the TV is turned on, the recorder automatically performs the Preset Download even if you perform Auto Set Up.

Before starting:

●Perform “Basic Connections” ( 3).

●Set the TV to its AV mode (with AV connection) or UHF channel 36 (with RF connection).

Auto Set Up

—Auto Channel Set/Auto Clock Set*/Auto Guide Program Number Set*

*If you select a country in Central or Eastern Europe, set the clock and Guide Program Number manually.

ATurn on recorder

Press 1. The Country Set screen appears on the screen.

● If you have connected your TV to the recorder with RF connection and the on- screen display appearing on UHF channel 36 looks distorted, perform “Video Channel Set” ( 16).

BSelect your country

Press rt to place the pointer next to your country, then press OK. The language is automatically selected for the on-screen display depending on the country you have selected. The AUTO SET/T-V LINK screen appears.

●If you select BELGIUM or SUISSE and press OK, the Language Set screen appears. Press rt to place the pointer next to the desired language, then press OK. Go to step 3.

● If you select MAGYARORSZÁG, CESKÁ REPUBLIKA, POLSKA or OTHER EASTERN EUROPE, press OK. The Clock Set screen appears. Press rt until the

desired time appears, then press OK or e. Set the date and year in the same way.

(Holding rt changes the time in 30-minute intervals, or changes the date

in 15-day intervals.) Then press MENU and go to step 3.

CPerform Auto Set Up

Press rt to place the pointer next to “AUTO SET” and press OK or e.

●If you are using the display panel, press rt to select “Auto” and press OK or e.

●Do NOT press any button during Auto Set Up.

DConfirm/Set video channel

With RF connection

The video channel that is shown on the display panel is your video channel. Press OK.

●If you have selected MAGYARORSZÁG,

CESKÁ REPUBLIKA, POLSKA or OTHER EASTERN EUROPE in step 2, “2” appears instead of “1”.

●To view picture signals from the recorder, set your TV to the

video channel.

With AV connection

Press PR – until the display panel shows “1 – –” (or “2 – –”). Now the video channel is set to off. Then press OK.

●To view picture signals from the recorder, set your TV to its AV mode.

ECheck results

If both Auto Channel Set and Clock Set have been performed successfully, the correct current time is displayed.

Turn on the TV and select its video channel or AV mode. Then make sure that all necessary stations have been stored in the recorder’s memory by using the PR button(s).

If Auto Channel Set has succeeded but

Clock Set has not, “1” is displayed.

ATurn on the TV and select its video

channel or AV mode. Then make sure that all necessary stations have been stored in the recorder’s memory by using the PR button(s).

BPerform “Clock Set” ( 13).

If both Auto Channel Set and Clock Set have failed, “– –:– –” is displayed. Make sure the cables are connected

properly. Turn off the recorder once, then turn the recorder back on again. The Country Set screen appears on the screen. Perform Auto Set Up or Preset Download again.

Preset Download

—Auto Channel Set by downloading preset data from TV/ Auto Clock Set*/Auto Guide Program Number Set*

*If you select a country in Central or Eastern Europe, set the clock and Guide Program Number manually.

ATTENTION:

You can use this function only with a TV offering T-V Link, etc.* Be sure to use a fully-wired 21-pin SCART cable.

*Compatible with TVs offering T-V Link, EasyLink, Megalogic, SMARTLINK, Q-Link, DATA LOGIC or NexTView Link via fully-wired 21- pin SCART cable. The degree of compatibility and available functions may differ by system.

Before starting:

Perform steps 1 – 2 of “Auto Set Up”.

APerform Preset Download

Press rt to place the pointer next to “T-V

LINK” and press OK or e.

●If you are using the display panel, press rtto select “CH – –” and press OK or e.

●Do NOT press any button during Preset

Download. When Preset Download is completed, “COMPLETED” appears for about 5 seconds, then the normal screen appears.

BCheck results

Perform step 5 of “Auto Set Up”.

CSet video channel to off

Perform “Video Channel Set” ( 16).

NOTES:

●Depending on the area, the recorder cannot perform Auto Set Up or Preset Download properly.

●In the area where no TV station transmits a PDC (Programme Delivery Control) signal, the recorder can perform neither Auto Clock Set nor Auto Guide Program Number Set.

●If you have moved to a different area, perform “Video Channel Set” ( 16) (with RF connection), “Tuner Set” ( 13) and “Clock Set” ( 13) as required.

●If a new station starts broadcasting in your area, perform “Tuner Set” ( 13) and, if necessary, “Video Channel Set” ( 16).

Language Set

You can change the language setting manually as required.

A Access Main Menu screen, then Auto

Channel Set screen

Press MENU. Press rt to place the pointer next to “AUTO CH SET”, then press OK or e.

— 4 —