JVC HR-LTR1U manual Timer Recording, Express Timer Programing

Timer Recording

Up to 8 timer recording programs can be made using Express timer programing method as far as a year in advance. Remember, the clock must be set before you can program the timer.

NOTES:

●If all the 8 programs have already been set, “PROGRAM FULL” or “Full” appears on the TV screen or the display panel.

●After timer recording is completed, the VCR turns off automatically.

●You can program the timer recording while a regular recording is in progress; the menu screens will not be recorded.

●To timer-record cable or satellite channels, be sure to keep the cable box or DBS receiver turned on with the correct channel selected.

●Even if a power failure occurs, the VCR keeps your timer programs. However, the clock time, channel settings, and other menu settings are lost. As a result, when the power is supplied again to this VCR after the power failure, this VCR starts the Plug&Play setting automatically to restore the clock time and channel setting. If the clock time and channel setting are restored correctly, each timer program you have made will start at its start time unless its end time has elapsed.

CPress OK or PROG..

●If “PROGRAM NOT COMPLETED PROGRAM OVERLAP” appears, see “Program overlap warning display”.

DPress TIMER. The VCR turns off automatically and “#” is displayed on the display panel.

To use the VCR while it is in timer recording standby mode

Press TIMER, then press POWER. After you use the VCR, press TIMER again to put the VCR into timer recording standby mode.

Checking, canceling or changing program settings

ADisengage timer

Press TIMER, then press POWER.

●When “AUTO TIMER” is set to “ON”, you do not have to press

TIMER.

Express Timer Programing

Load a cassette with the record safety tab intact. The VCR turns on, and the counter is reset, automatically.

BAccess Program Check screen

Press PROG. CHECK.

CAccess Program screen

Press PROG. CHECK again. Each time you press PROG. CHECK, the next program’s Program screen appears.

PR START		STOP	CH	DATE
1	8:00P	10:00	12	12/24
2	10:00A	10:45	40	12/25
3	11:30P	1:00	125	12/25
4
5
6
7
8
	PRESS (CHECK) TO NEXT
	PROGRAM 1
	START		STOP
	8:00 PM		10:00 PM
	DATE		CH
	12/24/01		12	SP

APress PROG. on the Remote to access the Program screen.

B Press START+/–,STOP+/–,DATE+/–		PROGRAM 1
or CH+/– repeatedly to enter the start	START				STOP
time, stop time, date or channel.	– –:– –AM			– –:– –AM
	DATE
● Press and hold START+/– or			– – –		CH
	– –/– –/– –				SP

STOP+/– to increase the time in
	PRESS (+/– , SP/EP, 8=DAILY
30-minute intervals.	9=WEEKLY), THEN (0K)
● To set the tape speed, press SP/EP	PRESS (PROG.) TO END

(p).

● To timer-record daily (Monday–Friday) or weekly serials, press DAILY (M-F) or WEEKLY. Pressing the button again makes the “DAILY” or “WEEKLY” display disappear.

PRESS (CANCEL) TO CANCEL

PRESS (CHECK) TO NEXT

DCancel or change program setting

To cancel a program, press CANCEL when the Program screen you do not want is shown.

To change a program, press the appropriate button: START+/–, STOP+/–, DATE+/–, CH+/–, and/or SP/EP (p) when the Program screen on which you want to make changes is shown.

EReturn to normal screen

Press PROG. CHECK repeatedly until no Program screen is shown.

FReengage timer recording standby mode

Press TIMER. The VCR turns off automatically and “#” is displayed on the display panel.

●When “AUTO TIMER” is set to “ON”, the timer recording standby mode automatically resumes when you turn off the VCR.