Playback features (cont’d) Recording
Rewind power off
When the tape has finished rewinding, the VCR will turn itself off.
During stop:
1 Press the Rewind 1 button.
2 Press the OPERATE button within 2 seconds. The STANDBY indicator will blink.
Tracking adjustment
Automatic tracking is adjusted each time a cassette is inserted in the video cassette player, you may wish to adjust tracking manually during playback.
Manual tracking
1 Press the remote control’s AUTO button.
2 Press the remote control’s TRACKING + or – button to adjust tracking.
7Press the AUTO button to return to automatic tracking.
Notes:
∙Tracking may need to be adjusted each time a different video tape is inserted for playback.
∙Tracking will be automatically set to the reference position when the cassette is ejected.
Use the following procedure to record TV programmes on a blank video tape.
Before proceeding:
∙To record TV programmes, the video cassette player must be connected to the TV as shown in connection B of the “Connections” section.
∙Turn on the power of the TV and video cassette player.
∙Make sure that the video cassette’s safety tab is intact. If it has been removed, cover the hole with adhesive tape.
| 1 |
| 2 |
|
|
| TV |
|
| |
|
|
| - | TVCH | + | OPERATE |
| |||
|
|
| - | VOLUME | + | TV/VIDEO |
| |||
|
|
|
|
|
|
| VIDEO |
|
| |
|
|
|
|
| TV/VIDEO |
| OPERATE |
| ||
|
|
|
|
| AUTO | - TRACKING + | 2 | |||
| OPERATE STANDBY |
|
|
|
|
|
|
|
| |
AUDIO | SP/LP/EP | NTSC | SCENE | B.E.S.T. |
|
|
|
|
| |
ON PAL TV | FINDER | (+ | - | + ( | ||||||
| B.E.S.T. LP/EP | NTSC3.58 |
|
| ||||||
| NTSC4.43 |
|
|
| ||||||
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
| [ | L |
| J |
|
|
|
|
|
| REMOTE CONTROL UNIT |
|
1 Load a blank video tape.
2 Press the Record ¦ button to start recording. (On the remote control unit press the Record ¦ and Play 3 buttons at the same time.)
The recording indicator will light during recording.
7Press the Stop/Eject ¤button or the remote control’s
Stop 7button to stop recording.
To stop recording temporarily:
7Press the Pause 8 button. The recording indicator will blink.
Press the Play 3 button to resume recording.
Notes:
∙To engage recording standby, press the Record ¦ button and then press the Pause 8button. The recording indicator will blink during recording standby. Press the Play 3 button again to start recording.
∙If the Record ¦ button does not work, check to see if the cassette safety tab has been removed.
∙The player automatically stops when
∙The video tape will be rewound automatically when the end of the tape is reached.
9