Reverse |
|
|
|
| Forward |
Reverse | Reverse | Reverse | Slow | Normal | Forward |
search | play | slow | motion | play | search |
3 steps |
| motion | 1 step |
| 4 steps |
|
| 1 step |
|
|
|
When the tape is not running
Rewind/fast-forward
Press REW (3) or FF (5).
Eject the cassette
Press STOP/EJECT (0).
●You can also eject the cassette when the VCR is turned off.
Turn off the VCR
Press POWER 1.
Playback Features
Turn on the VCR and TV, and select the VCR channel (or AV mode).
Adjusting tracking condition
—Tracking Adjustment
Automatic tracking adjustment
Whenever you insert a tape and start playback, automatic tracking starts working and continuously analyzes the signal to enable optimum picture quality during playback.
Manual tracking adjustment
If automatic tracking cannot eliminate noises well during playback, follow the procedures below.
On the Remote
APress SP/EP during playback to activate manual tracking.
BPress CHr/tto eliminate the noises. Press it briefly for a fine adjustment, or press and hold for a coarse adjustment.
● Press SP/EP again to reactivate automatic tracking.
Selecting monitor sound
—Audio Monitor
While playing back a tape on which stereo sound or SAP sound is recorded, press A.MONITOR on the Remote. Each time you press the button, sound changes.
NORM: Sound on the normal track is played back.
NORM
NOTE:
The above indication appears when “SUPERIMPOSE” is set to “ON” ( pg. 12), though the monitor sound changes in sequence.
Automatic operations after rewinding
—Next Function Memory
The Next Function Memory “tells” the VCR what to do after rewinding is complete. Ensure that the VCR is in stop mode.
●For Automatic Playback Start
Press REW (3), then press PLAY (4) within 2 seconds.
●For Automatic Power Off
Press REW (3), then press POWER 1 within 2 seconds.
●For Automatic Timer Standby
Press REW (3), then press TIMER within 2 seconds.
NOTE:
It is not possible to select the Automatic Timer Standby function if the cassette’s record safety tab is removed.
Playing back tape repeatedly (100 times)
—Repeat Play
During playback, press and hold PLAY (4) for more than
5 seconds. The play indicator ($) on the display panel starts blinking slowly. To stop playback, press STOP (8) on the Remote or STOP/EJECT (0) on the VCR.
Locating beginning of recordings
—Index Search
When recording on this VCR, index codes are placed on the tape at the beginning of each recording.
AWhile the tape is not running, press 2or 6on the Remote to start search.
BTo access a recording of 2 to 9 index codes away, press 2or 6 repeatedly until the correct number is
displayed on the screen (only if “SUPERIMPOSE” is set to “ON” ( pg. 12)). Playback begins automatically when the desired recording is located.
|
| Beginning of the |
| Current | Beginning of the | |||||||||||
|
| current program |
|
|
| position on | 2nd next program | |||||||||
|
| recorded |
|
| the tape | recorded | ||||||||||
|
| Previous |
|
|
|
|
|
| Next | 2nd | next | |||||
|
|
|
|
|
|
|
| |||||||||
|
| program |
|
|
|
|
| program | ||||||||
|
| recorded |
|
|
|
|
| recorded |
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Locating beginning of timer recordings
—Instant Review
After ensuring that the VCR is turned off and that the timer mode is disengaged, press REVIEW.
●The VCR turns on, and rewinds to the index code indicating the beginning of the last
●You can access a program of 2 to 9 index codes away from the current position on the tape. If, for example, you have
5 programs recorded and you want to watch the third one, press REVIEW three times.
●The Instant Review function will also operate if the VCR is turned on.
Skipping unwanted portions
—Skip Search
Press SKIP SEARCH on the Remote once to 4 times during playback. Each press initiates a
— 8 —
