[1] ak [MENU]: EXIT

52advanced features

Clock Set

You should only need to perform this function if:

•Auto Clock Set was not performed correctly by Auto Setup, Preset Download or Auto Channel Set

•The VCR’s memory backup has expired

•You want to change the Just Clock setting

Setting the Clock

get to the initial set screen Press MENU button. Move the highlight bar to INITIAL SET using the PR and PR buttons and press OK button (or ).

get to the clock set screen Move the highlight bar to CLOCK SET using the PR and PR buttons and press OK button (or ).

set time and date When the CLOCK SET screen appears, the time will be blinking. Use the PR and PR buttons to set the correct time (pressing and holding will advance the time in

30 minute increments) and then press OK button (or

). The

 

 

 

 

date will blink. Use the PR and PR buttons to set the

 

 

 

 

correct date (pressing and holding will advance the date in 15 day

 

CLOCK SET

 

 

 

 

 

increments) and then press OK button (or

). Set the correct

TIME

DATE

 

YEAR

year in the same way and press OK button.

 

 

0: 00

01 . 01

 

03

 

 

 

JUST CLOCK : ON

 

 

 

 

 

 

 

 

TV PR.

:

1

set just clock Set as desired using the PR and PR buttons then press OK button (or ).

set preset for clock data source If you have set JUST CLOCK to ON, you will need to specify a preset (station) for JUST

CLOCK to take its source data from. Use the PR and PR buttons to select the preset and press OK button (or ).

start clock operation Press MENU button.

NOTE:

If the recorder’s memory backup has expired or the AC was disconnected from the recorder, the recorder will automatically perform Auto Clock Set when the power is restored.

Notes on Just Clock

Some TV stations transmit a time signal with their broadcasts. This VCR has the ability to use this signal to update its internal clock (including the adjustment for British Summer Time). It will do this every hour except for 23:00, 00:00, 01:00 and 02:00. By setting Just Clock to ON, you are enabling the VCR to do this.

Just Clock is not effective in the following circumstances:

•when the VCR is powered on

•when the VCR is in Timer or Auto Satellite Programme Recording modes

•when a difference of more than 3 minutes between the internal clock and the time signal exists.

•when reception conditions are poor.