September 15, 2004 11:23 am Page 4
—4—
Master Page: Right
ACheck contents
Make sure the package contains all of the accessories listed in
“Specifications” (墌19).
BSituate recorder
Place the recorder on a stable, horizontal surface.
CConnect recorder to TV

RF Connection

ADisconnect the TV aerial cable from the TV.
BConnect the TV aerial cable to the ANT. IN connector on the
rear of the recorder.
CConnect the provided RF cable between the RF OUT
connector on the rear of the recorder and the TV’s aerial
connector.

AV Connection

If your TV is equipped with a AV Input Terminals connector,
perform AV connection to improve picture quality during tape
playback.
AConnect the aerial, recorder and TV as shown in the
illustration.
BConnect an optional AV cable between the AUDIO OUT/
VIDEO OUT connector on the rear of the recorder and the
AV-IN terminals.

S-video Connection

(allows you to make the most of the S-VHS picture performance.)
If your TV is equipped with a S-video input connector
APerform “RF Connection” previously described.
BConnect the supplied S-video cable between the S-VIDEO
OUT connector on the rear of the recorder and the S-video
input connector on the TV.
CConnect an audio cable between the AUDIO OUT connectors
on the rear of the recorder and the audio input connectors on
the TV.
●Even if you are using audio/video cables to connect your
recorder to your TV, you must also connect it using the RF cable.
This will ensure that you can record one show while watching
another.
DConnect recorder to mains
Plug the mains power cord into a mains outlet.
Basic Connections
Aerial terminal
S-video cable
(provided)
TV
aerial
cable
RF cable
(provided)
AV cable
(not provided)
Mains power
cord
Mains outlet
Back of recorder
S-VIDEO OUT
AV-IN terminals
AUDIO OUT/VIDEO OUT
Back of TV
HR-S6970AG.AJ_EN.fm Page 4 Wednesday, September 15, 2004 11:23 AM