JVC HR-VP636U manual Edit To Or From Another

EDITING

43

You can use your VCR as the player or the recorder.

Edit To Or

From Another

VCR

Player Your VCR

AUDIO OUT

VIDEO OUT

VIDEO IN AUDIO IN

Recorder Another VCR

1 2 3

4 5 6

7 8 9

1

2

3

4

5

MAKE CONNECTIONS

Connect an AV cable (not supplied) between the player’s VIDEO OUT and AUDIO OUT connectors and the recorder’s VIDEO IN and AUDIO IN connectors.

●When using your VCR as the recorder and a monaural VCR as the player, connect the player’s AUDIO OUT connector to the AUDIO IN L connector on the recorder.

LOAD CASSETTES

Insert the playback cassette into the player and the cassette to be recorded on into the recorder.

SET RECORDER’S INPUT MODE

Set to AUX. With this VCR, press NUMBER key “0” (AU appears on the front display panel in place of a channel number).

NOTE:

When using this VCR as the recorder, make sure to select "FRONT" or "REAR" (depending on which input connectors you use) at the Aux Input Screen. (To select the correct AUX input connector, follow steps 4, 5, 9 – 11 from the "Edit From A Camcorder" section, ☞ pg. 44.)

START PLAYER

Set to its play mode.

START RECORDER

Set to its record mode.

NUMBER "0"

0