Timer-Recording
Timer Recording Special case
Weekly (e.g.
Follow the procedure of timer recording on the previous page. At picture 3 press SET + or
When you press SET
Confirmation / Cancellation of the Timer Recording
1 If the Timer has been activated, press TIMER to deactivate the Timer. The clock symbol(
) will disappear. Then press VCR to change to VCR mode.
2 To confirm Timer program:
Friday.
The current day (Friday) 
One month later | |
| |
minus one day | |
| |
|
At picture 1 on the previous page select the TIMER REC SET option and press ENTER.
Then the timer program list as right will appear on the screen.
DATE | START END | CH |
26(SU) | 11:00PM 11:30PM125 EP | |
— — — — — — | — — | |
— — — — — — | — — | |
— — — — — — | — — | |
— — — — — — | — — | |
— — — — — — | — — | |
— — — — — — | — — | |
— — — — — — | — — | |
(Weekly Wednesday)
DATE | START | END | CH |
— — | |||
— — — — — — | — — | ||
— — — — — — | — — | ||
— — — — — — | — — | ||
— — — — — — | — — | ||
— — — — — — | — — | ||
— — — — — — | — — | ||
— — — — — — | — — | ||
In case Timer programs-overlap
•Do not overlap timer programs as portions of the conflicting programs will be lost. The first recording time has priority over the next recording time as shown in the diagram below.
8 : 00 | 9 : 00 | 10 : 00 | 11 : 00 |
Program 1
Program 2 |
|
|
|
|
| Deleted Parts |
|
Program 3 |
|
|
|
|
| Non Recorded Portion Parts |
|
Recording | Prog.1 | Prog.2 | Prog.3 |
Control Settings |
|
|
|
3 To cancel Timer program:
Press SET + or – to | DATE | START END | CH | |
select the unnecessary | — — — — — — | — — | ||
— — — — — — | — — | |||
program, then press | — — — — — — | — — | ||
— — — — — — | — — | |||
CANCEL to cancel the | — — — — — — | — — | ||
— — — — — — | — — | |||
program. | — — — — — — | — — | ||
— — — — — — | — — | |||
| ||||
4 Press SETUP MENU repeatedly until the
NOTES:
•If there are other timer record programs remaining, TIMER must be pressed to reactivate the timer, otherwise the remaining timer record programs will be ignored.
•You cannot confirm the Timer program during timer recording operation.
•You can also correct the programmed setting in program confirm mode.
At step 2 above, press ENTER to enter the program input mode. Then press ENTER repeatedly until the item you wish to correct
NOTES:
•The daily/weekly recording can be made continu- ously until the recording is canceled or the tape reaches the end.
•During timer recording the automatic rewinding mechanism does not function.
blinks. Then correct the data with SET + or
Then press SETUP MENU repeatedly until the TV- picture appears.
DATECH
32
