EN 75

 

 

* The default setting is bold in the table below.

 

 

8 PICTURE CONTROL

This feature helps you to adjust the playback picture quality according to your

NORM

preference. Normally select “NORM”.

EDIT

NORM:

Picture quality is adjusted automatically.

SOFT

EDIT:

Minimizes picture degradation during editing (recording and playback).

SHARP

SOFT:

Reduces image coarseness when viewing overplayed tapes containing a

 

 

 

lot of noise.

 

SHARP

Clearer, sharper-edged picture when viewing images with lots of flat,

 

 

same-colored surfaces such as cartoons.

 

NOTES:

 

 

● When you select “EDIT”, “SOFT” or “SHARP”, the selected mode will not change until you

 

select another mode.

 

● When you select “EDIT” to dub tapes, be sure to select “NORM” after you finish dubbing

 

the tapes.

 

 

 

8 SUPERIMPOSE

When this function is set to “ON”, various operational indicators appear on the TV

ON

screen. Messages appear in the selected language. ( pg. 20)

OFF

NOTES:

 

 

 

 

● When you use this unit as the source player for editing, be sure to set “SUPERIMPOSE” to

 

“OFF” before starting.

 

● During playback, the operation mode indicators may be disturbed depending on the type of

 

tape being used.

 

8AUTO SP]EP TIMER When this function is set to “ON”, the unit automatically switches to EP mode to

ON

allow complete recording if there is not enough tape to record the entire program

OFF

while timer-recording in SP mode.

 

For Example:

 

 

 

Recording a program of 140 minutes in length onto a 120-minute tape

 

Approximately 110 minutes

Approximately 30 minutes

 

SP mode

EP mode

 

 

Total 140

minutes

 

 

Make sure you set this function to “ON”, before the timer-recording starts.

NOTES:

●If you have programed the unit to timer-record 2 or more programs, the second program and those thereafter may not fit on the tape if you set “AUTO SP]EP TIMER” to “ON”. In this case, make sure the mode is not engaged, then set the tape speed manually during timer programing.

●In order to ensure that the recording fits on the tape, this feature may leave a slight non- recorded section at the end of the tape.

●There may be some noise and sound disturbance at the point on the tape where the unit switches from SP to EP mode.

●The Auto SP]EP Timer feature is not available during ITR (Instant Timer Recording), and the feature will not work properly on the following tapes: T(ST)-30, T(ST)-60, T(ST)-90, and T(ST)-120