
Masterpage:Right-No-Heading
EN 13
Filename [XVC27UM_06Index.fm]
Page 13 14 June 2004 4:20 pm
S-VIDEO Connection(DVD deck only)
8To connect to a TV with S-VIDEO/AUDIO input
connectors . . .
AConnect the unit to TV.
AConnect the antenna, unit and TV as per “AV
Connection” (墌pg. 12).
BConnect the unit’s S VIDEO OUTPUT (DVD)
connector to the TV’s S-VIDEO input connector.
BConnect the unit to power source.
Plug the end of the AC power cord into an AC outlet.
CSet the VCR channel to off.
AWhen the unit is turned off, press STOP (8) on the unit
for more than 5 seconds. “3 CH” appears on the front
display panel.
BPress CH +/– on the Remote to select “– CH” (off),
then press ENTER.
●If Plug&Play or Tuner setting has not previously been
performed, the Language Select screen appears and Plug&Play
takes place automatically.
NOTES:
●You can obtain high-quality S-VIDEO pictures.
●If your TV is not stereo-capable, use the unit’s AUDIO
OUTPUT connectors to connect to an audio amplifier for
Hi-Fi stereo sound reproduction.
●To operate the unit with your TV using the S-VIDEO
connection, set your TV to its AV mode. You can also use the
TV/VCR button on the unit’s Remote to set JVC TV to the AV
mode.
●For switching the TV’s mode, refer to the instruction manual of
your television.
●Only DVD picture is output from S-VIDEO OUTPUT
connector. (VCR picture is not output.)
A
TTENTION
Be sure to connect the unit’s VIDEO OUTPUT (DVD/
VCR) connector to the TV’s VIDEO input connector.
TV
To S-VIDEO input
connector
AUDIO OUTPUT
S-Video cable
(not supplied)
AC outlet
AC power
cord
Back of unit
RF cable
(supplied)
S VIDEO OUTPUT
Antenna or Cable
Matching transformer
(not supplied)
Coaxial cable
Flat feeder
To 75 ohm
Terminal
VHF/UHF
OUT
VHF/
UHF IN
Audio/video
cable
(not supplied)
VIDEO OUTPUT
Before performing the following steps:
●Make sure there is no cassette inserted in the unit.
●Make sure the unit is turned on, then press VCR/
DVD on the unit or VCR on the Remote so that the
VCR indicator lights up.
XVC27UM_06Index.fm Page 13 Monday, June 14, 2004 4:20 PM