80 EN

SUBSIDIARY SETTINGS (cont.)

Others Settings

* The default setting is bold in the table below.

8 RESUME

When this function is set to “ON”, you can use the resume function.

ON

( pg. 45)

 

OFF

ON:

You can start playback from the resume point of the

 

OFF:

placed disc.

 

You cannot use the resume function.

 

NOTE:

 

This function is not available for Audio CDs and MP3 discs.

 

 

8 ON SCREEN GUIDE

When this function is set to “ON”, the unit can display “on-screen

ON

guide” icons or characters which shows the conditions of the unit or

OFF

disc.

Child Lock

●Turn on the TV and select the VCR channel (or AV mode).

●Slide the TV/VCR/DVD switch to the right.

You can disable the unit’s operation.

A Set the Child Lock.

Press and hold POWER (1) on the Remote for more than 10 seconds while the unit is turned on. The unit turns off, and “CL“ appears on the front display panel.

●To release the child lock, press and hold POWER (1) on the Remote until the unit turns on.

NOTES:

●When the child lock function is in use, keep the Remote out of the children’s reach.

●Timer recording programs will be performed even if the child lock function activated.

Scan Mode Set

(DVD deck)

●Turn on the TV and select the VCR channel (or AV mode).

●Slide the TV/VCR/DVD switch to the right.

This unit supports the progressive scan system (eg. 480p*) as well as the conventional interlaced scan system (eg. 480i*).

If your TV equipped with component video connectors supports the progressive video input, you can enjoy a high quality picture by setting the progressive scan mode to active.

●Refer also to the instruction manuals supplied with your TV.

●If your TV equipped with component video connectors does not support the progressive video input, do not change the scan mode to the “PROGRESSIVE”.

*480p and 480i indicate the number of scanning lines and scanning format of an image signal.

•480p indicates 480 scanning lines with progressive format.

•480i indicates 480 scanning lines with interlaced format.

A Switch the mode.

During playback or while stopped, press and hold PROGRESSIVE SCAN on the unit or DVD on the Remote for more than 3 seconds, to change the scan mode between Progressive and Interlace mode.

●When the Progressive scan mode is selected, the Progressive mode indicator () lights up on the front display panel.