Remote control buttons and functions
Using the “Multi-picture” function
1Press the Xbutton
The “Multi-picture” menu appears.
1212
D0101-EN
2Press the 5buttons to choose
the number of screens and then press the abutton
1Choose to return to one screen.
•When set to 2-pictures multi, the main-
picture can be changed by pressing the ppbuttons. The sub-picture screen can be changed by pressing the p buttons.
When set to 12-pictures multi and there are more than 12 pictures, the next or previous 12 screens can be displayed by pressing the pbuttons.
Changing the sub-picture Displaying the next or previous 12 screens
2Choose to change to 2-pictures multi.
D0103
12Choose to change to 12-pictures multi.
D0104
2-pictures multi:
Main- | | | | | | | | | | Sub- |
| | | | | | | | |
picture | | | | | | | | | picture |
| | | | | | | | | | |
•When set to 2-pictures multi, press the g(swap) button to switch the main- picture and sub-picture.
Pay attention to the following.
-When the EXT-4 picture is a picture of 625p or 525p signal, you cannot choose EXT-4 with the pbuttons.
-When the EXT-4 picture signal is changed to 625p, 525p or 1125i signal while the EXT-4 picture is displayed as the sub-picture, the 2- pictures multi function is cancelled.
D0056
12-pictures multi:
Still pictures
Moving picture
D0058
•Do not press the g(swap) button while you are recording the TV output on the VCR. If you do, the TV output signal will change.
•You cannot view a scrambled channel in the sub-picture. If the g(swap) button is pressed when viewing a scrambled channel in the main-picture using an external decoder, the channel you have been viewing in the sub- picture will appear in both the main- picture and sub-picture.
