
ENGLISH
Playing a file on a USB device 
This unit can play MP3/WMA files stored on a USB mass storage class device.
You can connect a USB mass storage class device such as a USB memory, Digital Audio Player, portable HDD, etc. to the unit.
• You can also connect an Apple iPod/iPhone to the USB input jack. For details of the operations, see pages 20 – 22.
1 | Turn on the power. |
2 | Connect a USB. |
All tracks will be played repeatedly until you change the source or disconnect a device.
USB memory
If a USB device has been attached...
Playback starts from where it has been stopped previously.
•If a different USB device is currently attached, playback starts from the beginning.
Stop playing and detaching the USB device
Straightly pull it out from the unit.
•“NO USB” appears. Press SRC to listen to another playback source.
Cautions:
•Avoid using the USB device if it might hinder your safety driving.
•Do not pull out and attach the USB device repeatedly while “READING” is shown on the display.
•Do not start the car engine if a USB device is connected.
•This unit may not be able to play the files depending on the type of USB device.
•Operation and power supply may not work as intended for some USB devices.
•You cannot connect a computer to the USB input terminal of the unit.
•Make sure all important data has been backed up to avoid losing the data.
•Do not leave a USB device in the car, expose to direct sunlight, or high temperature to avoid deformation or cause damages to the device.
•Some USB devices may not work immediately after you turn on the power.
•For more details about USB operations, see pages 32 and 33.
10