JVC KD-AR200 Storing stations in memory, FM station automatic preset SSM, Manual preset, mode

	Storing stations in memory
ENGLISH
	• Automatic preset of FM stations: SSM (Strong-
	You can use one of the following two methods to
	store broadcasting stations in memory.
	station Sequential Memory)
	• Manual preset of both FM and AM stations
	FM station automatic preset: SSM
	You can preset 6 local FM stations in each FM
	band (FM1, FM2, and FM3).
	1 Select the FM band (FM1 – 3) you
	want to store FM stations into.
			Each time you press the
			button, the band changes as
			follows:
		FM1		FM2	FM3	AM
	2 Press MODE to enter the functions
	mode.

3 Press and hold SSM for about

2 seconds.

“SSM” flashes, then disappears when automatic preset is over.

Local FM stations with the strongest signals are searched and stored automatically in the band number you have selected (FM1, FM2, or FM3). These stations are preset in the number buttons—No.1 (lowest frequency) to No.6 (highest frequency).

When automatic preset is over, the station stored in number button 1 will be automatically tuned in.

Manual preset

You can preset up to 6 stations in each band (FM1, FM2, FM3, and AM) manually.

Ex.: Storing FM station of 92.5 MHz into the preset number 1 of the FM1 band.

1 Select the band (FM1 – 3, AM) you want to store stations into (in this example, FM1).

Each time you press the

button, the band changes as follows:

FM1 FM2 FM3 AM

2 Tune in to a station (in this example, of 92.5 MHz).

To tune in to stations of higher frequencies

To tune in to stations of lower frequencies

3 Press and hold the number button (in this example, 1) for more than 2 seconds.

Preset number flashes for a while.

12