About sounds reproduced through the rear terminals

•Through the analog terminals (Speaker out/LINE OUT/2nd AUDIO OUT): 2-channel signal is emitted.

When playing a multi-channel encoded disc, multi-channel signals are downmixed. (AUDIO—DOWN MIX: see page 31.)

•Through DIGITAL OUT (optical):

Digital signals (Linear PCM, Dolby Digital, DTS, MPEG Audio) are emitted through this terminal. (For more details, see below.)

To reproduce multi-channel sounds such as Dolby Digital and DTS, connect an amplifier or a decoder compatible with these multi-channel sources to this terminal, and set “DIGITAL AUDIO OUTPUT” correctly. (See page 31.)

•About Dual Zone

While you are listening to the radio, CD changer, or external component through the speakers built into your car compartment, you can listen to the playback sound of this DVD/CD player using the headphones connected to the 2nd AUDIO OUT plug at the same time. (For details, see page 35.)

ENGLISH

Output signals through the DIGITAL OUT terminal

Output signals are different depending on the “DIGITAL AUDIO OUTPUT” setting on the setup menu (see page 31).

 

DIGITAL AUDIO OUTPUT

 

Output Signals

 

 

 

 

 

Playback Disc

STREAM/PCM

DOLBY DIGITAL/PCM

PCM ONLY

DVD 48 kHz, 16/20/24 bits Linear PCM

48 kHz, 16 bits stereo Linear PCM

 

96 kHz, Linear PCM

 

 

 

 

 

with DTS

DTS bitstream

48 kHz, 16 bits stereo Linear PCM

 

with Dolby Digital

Dolby Digital bitstream

48 kHz, 16 bits

 

stereo Linear PCM

 

 

 

 

 

with MPEG Audio

MPEG bitstream

48 kHz, 16 bits Linear PCM

Audio CD, Video CD

44.1 kHz, 16 bits stereo Linear PCM /

 

 

48 kHz, 16 bits stereo Linear PCM

Audio CD with DTS

DTS bitstream

44.1 kHz, 16 bits stereo Linear PCM

MP3/WMA

32/44.1/48 kHz, 16 bits Linear PCM

57