JVC KD-G111 General settings — PSM, Basic procedure, Indications, 2Select a PSM item, 5Finish the procedure, 3Adjust the PSM item selected

General settings — PSM

ENGLISH

Basic procedure

You can change PSM (Preferred Setting Mode) items listed on the table that follows.

1

2Select a PSM item.

3Adjust the PSM item selected.4Repeat steps 2 and 3 to adjust the other PSM items if necessary.5Finish the procedure.

Ex.: When you select “AMP GAIN”

Indications	Selectable settings, [reference page]
DEMO	DEMO ON: [Initial]; Display demonstration will be activated
Display demonstration	automatically if no operation is done for about
	20 seconds, [7].
	DEMO OFF: Cancels.
CLOCK H	0 – 23, [7]
Hour adjustment	[Initial: 0 (0:00)]
CLOCK M	00 – 59, [7]
Minute adjustment	[Initial: 00 (0:00)]
AMP GAIN	You can change the maximum volume level of this receiver.
Amplifier gain control	LOW PWR: VOL 00 – VOL 30 (Select this if the maximum power
	of the speaker is less than 45 W to prevent them from
	damaging the speaker.)
	HIGH PWR: [Initial]; VOL 00 – VOL 50

14