•While playing from a USB device, the playback order may differ from other players.
•This unit may be unable to play back some USB devices or some files due to their characteristics or recording conditions.
•Depending on the shape of the USB devices and connection ports, some USB devices may not be attached properly or the connection might be loose.
•Connect one USB mass storage class device to the unit at a time. Do not use a USB hub.
•If the connected USB device does not have the correct files, “NO FILE” appears.
•This unit can show Tag (Version 1.0, 1.1, 2.2, 2.3, or 2.4) for MP3 files and for WMA files.
•This unit can play back MP3/WMA files meeting the conditions below:
–Bit rate of MP3: 16 kbps — 320 kbps–Sampling frequency of MP3:48 kHz, 44.1 kHz, 32 kHz (for(Sampling frequency: 48 kHz, 44.1 kHz, 32 kHz)
•This unit can play back MP3 files recorded in VBR (variable bit rate).•The maximum number of characters for:–Folder names : 25 characters–File names : 25 characters–MP3 Tag : 128 characters–WMA Tag : 64 characters•This unit can recognize a total of 2 500 files, 255 folders (999 files per folder), and of 8 hierarchies.
•This unit does not support SD card reader.•This unit cannot recognize a USB device whose rating is other than 5 V and exceeds 500 mA.
•USB devices equipped with special functions such as data security functions cannot be used with the unit.
•Do not use a USB device with 2 or more partitions.
•This unit may not play back files in a USB device properly when using a USB extension cord.
•This unit cannot play back the following files:–MP3 files encoded with MP3i and MP3 PRO format.
–MP3 files encoded in an inappropriate format.
–MP3 files encoded with Layer 1/2.
–WMA files encoded in lossless, professional, and voice format.
–WMA files not based on Windows Media® Audio.
Changing the source•If you change the source, playback also stops.Next time you select the same source again, playback starts from where it has been stopped previously.
Ejecting a disc or removing a USB device•If the ejected disc is not removed within 15 seconds, it is automatically inserted into the loading slot again to protect it from dust.
•After ejecting a disc or removing a USB device, “NO DISC” or “NO USB“ appears and you cannot operate some of the buttons. Insert another disc, reattach a USB device, or press SRC to select another playback source.
General
•If you change the “AMP GAIN” setting from “HIGH POWER” to “LOW POWER” while the volume level is set higher than “VOLUME 30,” the unit automatically changes the volume level to “VOLUME 30.”
Title assignment 
•If you try to assign titles to more than 30 station frequencies, “NAMEFULL” appears. Delete unwanted titles before assignment.
ENGLISH
17