Tuning in to a preset DAB service

1

2Select the preset DAB service (primary) number (1 – 6) you want.

More about this unit

Basic operations

Turning on the power

•By pressing SOURCE on the unit, you can also turn on the power. If the source is ready, playback also starts.

ENGLISH

If the selected primary service has some secondary services, pressing the same button again will tune in to the secondary services.

Tracing the same programme— Alternative Frequency Reception

You can keep listening to the same programme by activating the Alternative Frequency Reception.

•While receiving a DAB service:

When driving in an area where a service cannot be received, this unit automatically tunes in to another ensemble or FM RDS station, broadcasting the same programme.

•While receiving an FM RDS station:

When driving in an area where a DAB service is broadcasting the same programme as the FM RDS station is broadcasting, this unit automatically tunes in to the DAB service.

When shipped from the factory, Alternative Frequency Reception is activated.

To deactivate the Alternative Frequency Reception, see page 15.To change the display information while tuning to an ensemble

Service name = Ensemble name = Channel number = Frequency = Clock = (back to the

beginning)

Turning off the power

•If you turn off the power while listening to a disc, disc play will start from where playback has been stopped previously, next time you turn on the power.

Selecting the sources

•When no disc is loaded in the unit, “CD” cannot be selected.

•“CD-CH” or “DAB” cannot be selected when the target component is not connected.

Tuner operations

Storing stations in memory

•During SSM search...

–All previously stored stations are erased and stations are stored newly.

–Received stations are preset in No. 1 (lowest frequency) to No. 6 (highest frequency).

–When SSM is over, the station stored in No. 1 will be automatically tuned in.

•When storing a station manually, a previously preset station is erased when a new station is stored in the same preset number.

FM RDS operations

•Network-Tracking Reception requires two types of RDS signals—PI (Programme Identification) and AF (Alternative Frequency) to work correctly. Without receiving these data correctly, Network- Tracking Reception will not operate correctly.

To be continued...

19