More about this unit

Basic operations Turning on the power

By pressing SRC on the unit, you can also turn on the power. If the source is ready, playback also starts.

Turning off the power

If you turn off the power while listening to a disc, disc play will start from where playback has been stopped previously, next time you turn on the power.

Tuner operations

Storing stations in memory

During SSM search...

All previously stored stations are erased and stations are stored newly.

Received stations are preset in No. 1 (lowest frequency) to No. 6 (highest frequency).

When SSM is over, the station stored in No. 1 will be automatically tuned in.

When storing a station manually, the previously preset station is erased when a new station is stored in the same preset number.

FM RDS operations

Network-Tracking Reception requires two types of RDS signals—PI (Programme Identification) and AF (Alternative Frequency) to work correctly. Without receiving these data correctly, Network-Tracking Reception will not operate correctly.

If a Traffic Announcement is received by TA Standby Reception, the volume level automatically changes to the preset level (TA VOL) if the current level is lower than the preset level.

When Alternative Frequency Reception is activated (with AF selected), Network-Tracking Reception is also activated automatically. On the other hand, Network-Tracking Reception cannot be deactivated without deactivating Alternative Frequency Reception. (See page 16.)

• If you want to know more about RDS, visit <http://www.rds.org.uk>.

Disc operations

 

ENGLISH

 

 

Caution for DualDisc playback

 

• The Non-DVD side of a “DualDisc” does not comply

 

with the “Compact Disc Digital Audio” standard.

 

Therefore, the use of Non-DVD side of a DualDisc on

 

this product may not be recommended.

 

General

This unit has been designed to reproduce CDs/CD Texts, and CD-Rs (Recordable)/CD-RWs (Rewritable) in audio CD (CD-DA), MP3 and WMA formats.

When a disc is inserted upside down, “PLEASE” and “EJECT” appear alternately on the display. Press 0to eject the disc.

While fast-forwarding or reversing on an MP3 or WMA disc, you can only hear intermittent sounds.

Playing a CD-R or CD-RW

Use only “finalized” CD-Rs or CD-RWs.

This unit can play back only files of the same type which are first detected if a disc includes both audio CD (CD-DA) files and MP3/WMA files.

This unit can play back multi-session discs; however, unclosed sessions will be skipped while playing.

Some CD-Rs or CD-RWs may not be played back on this unit because of their disc characteristics, or for the following reasons:

Discs are dirty or scratched.

Moisture condensation occurs on the lens inside the unit.

The pickup lens inside the unit is dirty.

CD-R/CD-RW on which the files are written with “Packet Write” method.

There are improper recording conditions (missing data, etc.) or media conditions (stained, scratched, warped, etc.).

CD-RWs may require a longer readout time since the reflectance of CD-RWs is lower than that of regular CDs.

Continued on the next page

23