JVC KD-G727 General settings — PSM, Indications, 2Select a PSM item, 5Finish the procedure, 3Adjust the PSM item selected, Selectable settings, [reference page]

General settings — PSM

ENGLISH

You can change PSM (Preferred Setting Mode) items listed in the table that follows.

1

2Select a PSM item.

3Adjust the PSM item selected.4Repeat steps 2 and 3 to adjust the other PSM items if necessary.5Finish the procedure.

Indications	Selectable settings, [reference page]
DEMO	DEMO ON : [Initial]; Display demonstration will be activated
Display demonstration		automatically if no operation is done for about
		20 seconds, [7].
	DEMO OFF : Cancels.
CLOCK H	0 – 23 (1 – 12), [7]
Hour adjustment	[Initial: 0 (0:00)]
CLOCK M	00 – 59, [7]
Minute adjustment	[Initial: 00 (0:00)]
24H/12H	12H O24H, [7]
Time display mode	[Initial: 24H]
CLK ADJ	AUTO	: [Initial]; The built-in clock is automatically adjusted
Clock adjustment		using the CT (clock time) data in the RDS signal.
	OFF	: Cancels.
AF-REG	When the received signals from the current FM RDS station become
Alternative frequency/	weak...	: [Initial]; Switches to another station (the programme
regionalization	AF
reception		may differ from the one currently received), [11].
		• The AF indicator lights up.
	AF REG	: Switches to another station broadcasting the same
		programme.
		• The AF and REG indicators light up.
	OFF	: Cancels (not selectable when “DAB AF” is set to “AF ON”).
PTY-STBY	Activates PTY Standby Reception with one of the PTY codes, [10].
PTY standby	OFF [Initial] =PTY codes, [10] =(back to the beginning)

16